Recent content by Lane Attaway
-
5.7 cam/lifter issue explanation
YES that’s who it was!!- Lane Attaway
- Post #7
- Forum: Engine & Performance
-
5.7 cam/lifter issue explanation
So I can’t say for certain because, it is my opinion lol, that video along with working at a CDJR (Chrysler, jeep, dodge, Ram) dealership fully convinced me, MDS is not at fault for eating cams but can be blamed for failed lifters. It depends on how they failed. When MDS is at fault, the lifter...- Lane Attaway
- Post #3
- Forum: Engine & Performance
-
5.7 cam/lifter issue explanation
So I just felt the need to share this info with everyone here who has the 5.7. I cannot remember the fellas name for the life of me but I found a video on YouTube of a guy explaining what causes the hemi to eat cams (hopefully someone else has seen this!!). Basically the video explains that...- Lane Attaway
- Thread
- Replies: 8
- Forum: Engine & Performance
-
Travel trailer towing help!
So Is the tongue weight not factored in to the dry weight or the GVW? Thought the tongue weight was just the amount of the total weight that is on the tongue of the trailer not additional weight to the trailer?- Lane Attaway
- Post #16
- Forum: Towing & Hauling
-
Travel trailer towing help!
So far it seems I should be fine. The specs are from a dealers site but it’s been the same across multiple dealer sites. I know they are gonna advertise lowest possible weight they can but that’s why I said something about the extra head room I would have (~900lbs.) because I know what’s listed...- Lane Attaway
- Post #14
- Forum: Towing & Hauling
-
Travel trailer towing help!
As in distributing the cargo load in the trailer? If so, I assume it’s best to keep it even as possible but correct me if I’m wrong, a little more of the weight towards the front would be fine right? Like using the front storage area?- Lane Attaway
- Post #3
- Forum: Towing & Hauling
-
Travel trailer towing help!
Hey all, wanted to get some insight from people with travel trailers and experience towing them. My fiancé and I are wanting to look for one and have found one we really like, a Bullet 250BHS. Payload on my truck is 1394 lbs. and tongue weight on TT is 600 lbs. so I am good there. Dry weight on...- Lane Attaway
- Thread
- Replies: 85
- Forum: Towing & Hauling
-
35x12.50R20 on a leveling kit!!
Sorry, been bad about keeping up with this. Only rubbing issue I’ve had which is no concern to me is if I hold the wheel locked out and go over uneven terrain, they’ll barely rub the sway bar. Not enough to be worried about at all, if I turn to the lock and let it come back just a bit, no...- Lane Attaway
- Post #20
- Forum: Exterior
-
35x12.50R20 on a leveling kit!!
My pleasure buddy! Glad I could help someone else out lol! I know how long I spent just trying to find if anyone had a 12.5 on the chrome clads so figured I’d put my info out there to try and help!- Lane Attaway
- Post #17
- Forum: Exterior
-
35x12.50R20 on a leveling kit!!
Just a quick measurement of em on my lunch break, these tires mounted on these rims measured at about 34.25” tall and about 12.25” wide. Keep in mind this was a very rough/quick measure so they very well could be a true 12.5.- Lane Attaway
- Post #15
- Forum: Exterior
-
35x12.50R20 on a leveling kit!!
Yes that is correct. I have a 1.5” rear spacer I may add later due to squatting when towing but its not required at all to fit these. I would think they would fit with the Bils at 2.1”. I haven’t measured my tires to tell if they are a true 12.5 or not but they’re at least close to. Here’s all I...- Lane Attaway
- Post #13
- Forum: Exterior
-
35x12.50R20 on a leveling kit!!
In case anyone was curious on how fitment was, it’s close but still decent room. Almost enough to make me think you could run 37x12.50 without rubbing, maybe some on the inner fender liners but could easily be fixed. I would say there’s somewhere around 3/8”-1/2” from sidewalk to the uca.- Lane Attaway
- Post #9
- Forum: Exterior
-
35x12.50R20 on a leveling kit!!
Thanks guys! Im trying to make her mine and make her stand out, I love tasteful uniqueness (if that’s a thing lol) And to be as cheap as these tires are, so far mainly just been highway riding but these tires have impressed me considering I got the set under $1000!!! And they’re the 12 ply! I’ll...- Lane Attaway
- Post #7
- Forum: Exterior
-
35x12.50R20 on a leveling kit!!
Thanks man!! Been a lurker on the forum since I bought the truck about a year and half ago.- Lane Attaway
- Post #3
- Forum: Exterior
-
35x12.50R20 on a leveling kit!!
Just wanted to put this info out there because I had a very hard time finding any on the chrome clad (big horn) 20” wheels. I have a set of 35x12.50 Gladiator X-comp MT tires mounted on my stock 20x8 chrome clad wheels. I was a bit concerned since almost no tire manufacturers recommend an 8”...- Lane Attaway
- Thread
- Replies: 22
- Forum: Exterior
