Recent content by loki223

  1. loki223

    Dash Cams - What Do You Have?

    For those that tapped into the factory wiring in the overhead console, has anyone looked into building a T harness? I prefer not T Tap anything, and would rather build a T Harness. I thought at some point i had found a company that sold one, but i can't see to find it anymore. Getting ready...
  2. loki223

    Tire size change alfaOBD

    I did the full procedure listed in post #1 and it worked. Verified with a GPS app on my phone that everything reads correctly, when before it was about 2 mph off
  3. loki223

    Tire size change alfaOBD

    So reading the last couple pages for changing tire sizes it seems like there are some issues currently? What are the current steps for Alpha? i have version 2.1.9.5 and am ready to change my size, but also don't want to brick anything or run into some of these issues, 2018 Ram 3500. Running...
  4. loki223

    Backlit front RAM emblem

    So, i am curious if anyone has done this with the RAM for the grill/tailgate, while keeping the chrome letters? I know harmon customs makes replacements for the front, but they don't for the rear. And they are not available in a chrome finish, i am thinking of doing it myself, but am curious...
  5. loki223

    Alpharex G2 2019 Style Headlights

    If you put HIDs in your factory fog lights they appear "brighter" because they are now flood lights and do nothing beneficial for you, or the others around you. HIDs should ONLY be used in projector housings. If you want better fog lights there are several options out there, i am runnign...
  6. loki223

    Tie Down Solution?

    I have these on the rear stake pockets and the center ones (8 ft bed) https://www.amazon.com/gp/product/B07WRFB9WQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 And these in the access holes inside the bed at the steak pockets...
  7. loki223

    Alpharex LUXX series

    Of course @Jimmy07 has already installed these, so being that you did it months ago, what are your opinion of them in use? Did you get the light show issue rectified? I kinda like the overall design, curious how they actually perform though. Also, how does the beam pattern perform?
  8. loki223

    2019 HD Tail lights in a 4th gen

    Well an update for me. When I built my harness I didn't get the - can bus wire fully seated on the passenger side tail light. After much trouble and error i noticed that. Fixed it and everything worked. One note though. I programmed the truck with the can bus connectors plugged in and...
  9. loki223

    2019 HD Tail lights in a 4th gen

    More like 12 inches of extension. When I went back out and took a closer look I found the same info with my pesky eye holes. Also, why has nobody mentioned how much of a pain it is to access those BCM connections? The one on the right isn't horrible, but the one on the left was...
  10. loki223

    2019 HD Tail lights in a 4th gen

    Has anyone done this that had to deal with the factory amp? Mine is blocking access to the BCM connections I can barely get my hand up to touch the left one, but the right one is nearly fully covered and inaccessible. Plus what j can see the amp isn't exactly easily removed.... would be...
  11. loki223

    2019 HD Tail lights in a 4th gen

    wiring or programming? Did you set the tails to LED so that the computer doesn't think that the bulb is out?
  12. loki223

    2019 HD Tail lights in a 4th gen

    Mirror glass showed up. Guess some time this week i get to install my harness and see if i made it wrong or right. If it doesn't work i might be talking with @Roman217 to see about sending him what i made and having him fix it. lol. But i believe everything should be right. We'll see...
  13. loki223

    2019 HD Tail lights in a 4th gen

    @Jimmy07 Is this specific to the 1500s? or should i follow this when programming my BCM? I'm asking because in reading this thread i noticed the 1500 trucks require a bit more effort then the HD trucks Also, Athen's dodge was great to order the mirrors from. They followed up right away...
  14. loki223

    2019 HD Tail lights in a 4th gen

    I just ordered some from Athen's dodge. They emailed right away asking for my vin and i told them no thnks, the vin won't help you. I know what i'm ordering just send it. Hopefully they do. I told them if they absolutely need a vin i could probably get one for them, but there is no real...
  15. loki223

    2019 HD Tail lights in a 4th gen

    The only thing i have left is to get the BSM mirror glass, but i imagine i'll order soon enough for that. My tails should be here Friday because i accidently made an offer on ebay that was accepted. So i went ahead and ordered wire for the project. I imagine i'll be getting the glass by the...

Latest posts

Members online

Forum statistics

Threads
195,597
Posts
2,872,368
Members
156,408
Latest member
Bobram1500
Top