-
-
LoneWolf3574 replied to the thread 4th gen heads on 3rd gen?.Please read the entire thread and you will have your question answered. -
LoneWolf3574 reacted to 3pedals's post in the thread ‘08 4.7 6spd lightning bolt/coolant temp/voltage and no gas pedal with
Like.
Retaining clips were seized in “unlocked” position on upper two plugs, and my mechanic didn’t notice. He was able to loosen them up to... -
Hi-Ram intercooler.
-
-
LoneWolf3574 replied to the thread Stalling while driving.Elaborate, how would an idler stall an engine, much less a diesel? A seized idler would cause the belt to squeal or possibly break.
-
Man o man what a difference. Rolling 37's @ 75mph (gps) while turning 2100 rpm's with my foot barely touching the pedal. First, second...
-
A Cold engine wastes more fuel the sensors that start the fuel trims are the intake air and the coolant temperature sensor After the...
-
LoneWolf3574 replied to the thread 02 1500 4.7 45RFE wont shift.Yes, VIN and mileage are required as well as anything specific to the truck otherwise you will have even more codes. It looks like you...
-
LoneWolf3574 reacted to Ole Buck's post in the thread My 04 1500 4.7 rebuild documentary with pics starts today !! with Like.
Back again !!! well i its been a minute but i hate leaving open documentary's. I found my oil leak. It was my oil pan. Of all the...
-
LoneWolf3574 replied to the thread Radiator Recommendation.Yeah, tried that since they are the manufacturer of this one with the pinhole leak that I have right now. That may have been true when...
-
I'm looking for a radiator recommendation. I just had my 4th radiator in as many years spring a leak, to say I'm frustrated is an...
-
-
Basically the same engine, short answer yes. Yes, the Aspen is based on the Durango and used the same 5.7 as the Rams. You will need...
-
LoneWolf3574 replied to the thread engin swep.How much money do you want to spend? Long answer short, no. Search the forums, there are people that have done it. The shortlist of...
-
LoneWolf3574 replied to the thread P0172 will just not go away.P0172 DODGE Code - Fuel System 1/1 Lean Fuel System Rich Bad injectors may throw a P03** code (cylinder misfire) associated with the...
-
LoneWolf3574 reacted to Brando_SLT's post in the thread Looking for recommendations; intake and motor mounts. with Like.
Don't do this... You will hate yourself. Just get the complete isolator/motor mount. You have to pull the whole thing either way, might...
-
-
Loading…
-
Loading…
Members online
- Gabe79150
- Wild one
- Black Pearl 2017
- M3AN ONE
- Lee955i
- Docwagon1776
- Not so old grey
- rick1201
- Ludville1
- maxx442
- Hanover Fiste
- Martins hemi
- Wire
- pacofortacos
- Burn2k12Ram
- kolya
- Mudd_jumper
- KingJ2
- 18harvest
- star_deceiver
- DoughRat19
- HEMIMANN
- Fritter
- slowpoke_street
- mb33458
- RC Turner
- ImNraged
- RamBat23
- H1Chester
- LoadedExpressRam
- Oogs
- demech
- Xman19DS
- Dginn69
- umbighouse
- jonathanhudaon
- Randy K
- leafsby2
- Adamcr68
- Dontra
- SublimeZ
- czervika
- fordf250
- Rav3ncroft
- TMyers
- JNelson
- drod327
- Downzero
- Bnwild95
- Kimjkurt