Looks like your front end is sitting lower. Your upper control arm don’t look (should be sitting higher). Check your shocks and see how much down travel is left or something was jammed down pretty hard to where it’s bent/broke.
The ball joint cap should be sitting flat, not arched up towards...
I wonder if the previous owner knew of a bad coolant leak and threw in a ton of Bars stop leak or something like that. Maybe the junk was tossed in like wood to a fire. Hope you get this fixed!
Good day,
Just wanted to see if anyone in Northern Ontario knows of any shops that can clean, polish, and surface some 5.7 Hemi heads around here?
Sudbury/Timmins/North bay areas to be exact. Even Southern Ontario if I have too.
Thanks for any suggestions.
Hello, just wondering what the amperage draw should be from the radio. Im
Pulling 1 amp as I used the multimeter test and pulled fuses until I found the radio drawing 1 amp. My battery would die over a period of time (7-9 days) without starting it.
Thanks for any help!
I have the 2011 with the 545rfe…. I threw on a Hayden aftermarket trans cooler and did not by pass the Rad. I have mine tucked behind the front grill to the driver’s side. It’s bolted to the top cross member and lower cross member using brackets I fabricated, not hard at all. Just ran send and...
I don’t know if this has been figured out or fixed. However, Run a wire from battery ground to starter, positive battery to alternator. You can run another wire from battery ground to fender (same bolt that is used for battery ground). I had all these symptoms and replaced battery/starter and...
You get this done yet? Just started unbolting my front diff this evening, changing my pan on my 2005 Dodge ram 1500 5.7 that has a 3” body lift and 2” levelling kit. The body lift has made it easy to get to the 5 bolts on the driver’s side and they all came out rather easy with a breaker bar and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.