Recent content by M27
-
M
Need help on centering rear wheels after 2/4 drop
All specs within acceptable range except for caster. Here are the alignment specs from alldata -
M
Mag-Hytec Diff Cover and 2” Rear Lower
I did a 2/4 drop without removing the rear bump stops and that ‘U’ shaped piece and I would get a violent bottoming out on big bumps or dips. After driving for about two months I recently got my truck on a lift to check where it’s hitting and the no cut brackets are hitting the bump stops and... -
M
Need help on centering rear wheels after 2/4 drop
Updated pic with wheels centered after adjusting the control arms -
M
Rear bump stop removal
Did you have to cut the threaded part of the bump stop to make it fit or is there enough space to just bolt it up. -
M
Need help on centering rear wheels after 2/4 drop
I recently lowered my truck 2/4 with crown suspension coils and the wheels are noticeably closer to the rear of the wheel wells. Parts installed core4x4 track bar with bell tech relocation bracket,core4x4 upper and lower adjustable control arms, ihc no cut brackets, Viking shocks all installed... -
M
2/4 crown suspension drop
yes they were installed after I bought the longer t-bar kit no problems -
M
2/4 crown suspension drop
front qa1's and smaller bumpstops installed and the shop had to retighten the control arms because they were already loose and it now drives and handles pretty good -
M
Lowering my truck today. Need help.
ak did you have any driveshaft clearance issues with your drop because I recently dropped mine 2/4 and the driveshafts harmonic balancer sometimes hits the heat shield next to gas tank on certain turns and bumps. -
M
2/4 crown suspension drop
thanks guys, i measured the stock t-bar length and its 3.5" and the qa1 is 3" so i ordered a new t-bar kit hopefully with the new bump stops and qa1's installed the ride will be better -
M
2/4 crown suspension drop
it doesnt drive that good since its almost riding on the stock front bumpstops with the stock shocks -
M
Possibly selling my Belltech 2/4" drop springs
did you have to cut out the front bumpstops? and do you know the measurements of the bumpstops i need to replace mine i just did a 2/4 drop and it has the stock bumpstops -
M
2/4 crown suspension drop
the shock lower mount is u shaped and the bolt only contacts its outer edge and he said it might come off
