Recent content by MontyNC
-
Startup 65RFE Transmission whine
So far cold it does it in park and neutral, sound can be heard near the center of the pan. Loudest coming down from fast idle. Once warm in park it is gone at the center of the pan but some noise is heard on the side where the accumulators are but not as loud (stethescope has to almost be on...- MontyNC
- Post #13
- Forum: Engine & Performance
-
O2 upstream removal... found a tool for the tight space
Found a tool to get the drivers side upstream o2 out on the 4x4 Stuby Titan 12051 Is has a 1/2 inch and 3/8 side Using a shallow o2 socket and going at it from the wheel well came right off.- MontyNC
- Thread
- Replies: 0
- Forum: Engine & Performance
-
Startup 65RFE Transmission whine
So I drove around recording line pressures. Put it in park, heard slight whine It is no longer loud in the center of the pan. The whine is now at the line pressure sensor. In neutral the line pressure sensor whine is there and is sounds like a mini Jetsons spaceship whine where the ud...- MontyNC
- Post #10
- Forum: Engine & Performance
-
What to look for on a bad 65RFE valve body
Will a 68RFE valve body work in a 65rfe transmission without modification? Has any one done it? I am looking at revmax valve bodies, but they only have the 68RFE valve bodies. I belive my valve body is on the way out. Thanks- MontyNC
- Post #492
- Forum: Engine & Performance
-
Startup 65RFE Transmission whine
Video of noise Source is coming from the valve body about where the solinoid switch valve would be. After listening real hard mine whines if I go slow enough and listen mine has the whine from 1st-2nd. I cannot hear it in 4th 5rh 6th (maybe due to road noise) I'm thinking a valve body...- MontyNC
- Post #9
- Forum: Engine & Performance
-
Startup 65RFE Transmission whine
Everything I have read says it has to be pushed in all the way.- MontyNC
- Post #8
- Forum: Engine & Performance
-
Startup 65RFE Transmission whine
Dropped the pan after seeing some people smacking the filter in. I only pressed it in really hard. I smacked it and heard it seat. Whine is still there but less Is yours an early 2014 back jws123? Has the fluid and filter been changed? I seen that some people had issues with the sump filter...- MontyNC
- Post #6
- Forum: Engine & Performance
-
Startup 65RFE Transmission whine
Drained for about 20 min. Put 6.5 quarts back in, at 70° it is just touching the 2nd cold temp hole in neutral. At 153° the highest the temp gets to, it is 70% between the 2nd cold hole and 1st hot hole. The pan is a dorman pan I do not see a thermal bypass anywhere on the lines. My truck is...- MontyNC
- Post #4
- Forum: Engine & Performance
-
Startup 65RFE Transmission whine
I have a 2014 6 speed On startup hot or cold, when the idle comes down to around 1100-900 RPM, I get a whine from the transmission pan for about 5 seconds. (Verified with stethescope) Keeping my foot on the brake makes it louder. I changed the filters and fluid today. Fluid is at the...- MontyNC
- Thread
- Replies: 12
- Forum: Engine & Performance
-
Exhaust leak with a twist.....
I have a lisle stethescope coming to verify 100% I plan on using a belt sander and a sharpie to level it out if it is warped.- MontyNC
- Post #3
- Forum: Engine & Performance
-
Exhaust leak with a twist.....
Has anyone ever had a gasket only failure? No broken bolts?. A year ago had my manifold bolts and gaskets done by the dealership. Bugged the crap out of them to check for warpage. Now I am getting an exhaust tick cold, when warm I feel like I can hear it under load hills or passing. All the...- MontyNC
- Thread
- Replies: 3
- Forum: Engine & Performance
-
Update...Lazy o2 sensor?
UPDATE***** I feel stupid When using OBDLink MX+ graphing disable "smoothing" Smoothing I'm assuming averages out the data. On a good note I did notice the waveforms are tighter and both banks almost mirror each other.- MontyNC
- Post #9
- Forum: Engine & Performance
-
Update...Lazy o2 sensor?
Well sensors have been replaced. Idle is fine, but crusing it is stuck in the middle. All wires looked good. No codes.- MontyNC
- Post #8
- Forum: Engine & Performance
-
-
Update...Lazy o2 sensor?
No check engine light. Got what I thought was bad gas the other day, ran two tanks and still hear what sounds like spark knock mid to mid- wide open throttle. When checking long term fuel trim and o2, I noticed the 1/1 sensor seemed off.- MontyNC
- Post #3
- Forum: Engine & Performance
