Recent content by MoPowered

  1. MoPowered

    Wheel Spacers with NO level/lift

    Make sure the wheel spacers are hubcentric, meaning they have the lip on them and remove the factory flat tabs off the hub assembly around the factory studs before you mount them. Bora and Spidertrax are the best out there. And they won’t wear on wheel bearing so long as they are Hubcentric. If...
  2. MoPowered

    To ceramic coat or not?

    I can only add that for true paint correction and ceramic coating 1,400 is not a bad price. You neeed to understand that ceramic and graphene’s do a lot for paint protection but are not the do all end all of vehicle maintenance. If you’re looking for high gloss, protection and ease of use at a...
  3. MoPowered

    Who has experience with the 4Runner?

    Well well, look what the 4Runner dragged in!! LOL! What's up Mo'? Long time no "see". Hope you and the family are all good? Heya my fellow, OCNY, things are good thanks for asking, how goes everything with you. I pop in to check on posts every once and again. But seeing as how I'm in between...
  4. MoPowered

    Who has experience with the 4Runner?

    Not many of the member’s here know this but I purchased a 2019 4 Runner TRD Off Road Premium. I can tell you this you won’t be disappointed at all. I pull over 19mpgks with my lift and 33’s. It doesn’t have a peppy pick-up compared to our 14 Limited GC, but that’s because it’s a 5 speed auto not...
  5. MoPowered

    Some Pictures of my New Truck!

    Loving the color congrats.
  6. MoPowered

    Tire question

    Not to Hijack the thread but it was a 1970 Twilight Blue Metallic, 455cid punched out .30 over, full cam all roller, high rise Edelbrock manifold, Holley 780cfm carb, billet steel flywheel, Center Force dual friction clutch, M-22 straight cut Rock crusher trans 4:10, 12 bolt posi, tire smashing...
  7. MoPowered

    Tire question

    I always look at the Brands I like, Cooper, Bridgestone, Mickey Thompson, **** Cepek, Good Year etc...,then I think about tread wear, snow, rain, looks and price. Then I throw a quarter in the air and when it comes down if I don’t like it I throw it up in the air again, lol. And I personally...
  8. MoPowered

    Tire question

    I can only say this so far as best tires for you and your vehicle, that’s as subjective as to what’s the best beer, best chips, best frozen pizza etc....I’ve had so many brands on so many different vehicles and I can only think that some of the best performing tires on whichever vehicle they...
  9. MoPowered

    Tire question

    Well FYI, Cooper bought them and **** Cepek and from what I read Good year owns them all now, lol. I’ve always like Mickey Thompson as he made his living off road and practiced what he preached.
  10. MoPowered

    Tire question

    I always liked Mickey Thompson tires, Andy ran them on several Wrangler's and my 99 2500.Loved them but the got to be real costly so I switched out to some other brands. Duratracs, MTR’s Hercules Terra Tracy TrailDiggers, and Trxus MTR’s. When I saw these where on sale I went right back to them...
  11. MoPowered

    Tire question

    I just bought a set of Mickey Thompson Deegan 38’s that are an A/T check them also.
  12. MoPowered

    Tire question

    Yeah the AT3 is a good tire and they have a newer slightly more aggressive AT3 XLT that has some serious siping in it it should do well in rain and snow.
  13. MoPowered

    Considering a PW

    Lol, why do people think that the Power Wagon’s have “trouble” pulling a load? It’s still a 2500 Heavy Duty full frame truck. Sure payload and tow rating is lower than other in class trucks and some 1500’s properly equipped will tow as much or more on ratings. But let’s call this ******** when...
  14. MoPowered

    Interested in PW

    Effectively your pushing those 37’s with about a 3.55 gear ratio from the factory 4.10’s. Give or take a few depending on true tire diameter at inflation rates wheel widths and tread wear. All those come into play and the only thing that won’t come into play is wheel diameter because a 37” inch...
  15. MoPowered

    Interested in PW

    My 12 is 5.7, without mds of course so no lifter issue after 72k+ miles. 6 speed trans and no issues there either. I’ll keep mine over the newer 6.4 due to them dropping the gearing to 4:10. My 4.56’s turn the 37’s easily and the ride is like a 67’ Caddy. Lol, almost. So far as the having to to...

Forum statistics

Threads
195,469
Posts
2,870,597
Members
156,178
Latest member
mmcquinn
Top