Recent content by Mrmagoolin

  1. M

    AlfaOBD

    This is what came up in the google docs with this site as everything needed. My log of my 2014 just shows the "trailer tow present" also and it is marked yes, but mine came with the tow package. All of the codes below with the exception of the "trailer hitch camera" are marked as "yes or...
  2. M

    AlfaOBD

    What all setting have you enabled? Have you enabled the CSM setting? And it is a 2014 truck?
  3. M

    AlfaOBD

    I have a 2014 that came with the backup camera only in the radio. I installed the cargo cam and enabled it with AlfaOBD it worked as it should until the 18.45.xx update. I then lost my cargo cam. I sent it to Infotainment and they reset it the 17.11.xx software and put a patch for the GPS on...
  4. M

    AlfaOBD

    You don't need the security cable with a 2016. Everything else you are correct on. How to save your initial report should be in the first post. The first post should give you all the info you need.
  5. M

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    Thanks for that info.
  6. M

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    If you have the heated seats/wheel already can you add just the vented parts?
  7. M

    AlfaOBD

    I have also had this issue. I just leave it running and it loads. Just takes quite a bit of time. Any chance you have a galaxy S9?
  8. M

    Adding back up cam app to 8.4 uaq

    Does the button show up on the 13, 14 and 15's.
  9. M

    ROLL-UP INFO: FOTA 18.11.x & uC D/L 18.45.01 SW Update 13-17 RA3/Vp3-NA & Ra4 VP4-NA

    Yes I did write 43 instead of 45. Too many numbers to keep straight. My new radio came back with 18.45.01 and the cargo cam does NOT work. My original radio that they replaced had version 18.13.17 and the cameras worked as they should. I had 17.11.XX and they pushed an ota update and that is...
  10. M

    ROLL-UP INFO: FOTA 18.11.x & uC D/L 18.45.01 SW Update 13-17 RA3/Vp3-NA & Ra4 VP4-NA

    I was trying to update to 18.43.01. If you have a cargo cam that is working you do NOT want to update to 18.43.01. You will no long have the cargo cam. I had F/W 18.13.XX and the cargo cam worked as it should. I am in the process of working with Uconnect in an attempt to get it corrected.
  11. M

    ROLL-UP INFO: FOTA 18.11.x & uC D/L 18.45.01 SW Update 13-17 RA3/Vp3-NA & Ra4 VP4-NA

    Hoping someone can help me. After some time it was determined that my radio was to be replaced because of the firmware issue I had. The radio was replaced. I have a 2014 VP4. Before all this happened I installed and had working a cargo cam. If you put it in reverse the picture came up and...
  12. M

    ROLL-UP INFO: FOTA 18.11.x & uC D/L 18.45.01 SW Update 13-17 RA3/Vp3-NA & Ra4 VP4-NA

    I was having trouble updating my FW. Because of me I bricked it. Can it be sent anywhere to be repaired? What all info do I need to find a replacement? Is there a thread some where that will help me out? Thanks in advance. This was not a firmware brick I caused it. It is not as bricked as...
  13. M

    AlfaOBD

    I'm trying to figure out what you are saying. I have a 14 8.4 that shows both camera inputs on the radio. Yes they are one at a time. When I put it in reverse I can choose with soft buttons to use either one of them. I can also go to controls and select the cargo camera. Software version is...
  14. M

    AlfaOBD

    Have tried that. I can delete and load version 2176 which is the next most recent I have downloaded.
  15. M

    AlfaOBD

    I have and the APK site won't open either. Also 2192 was opening for me.
See more

Latest posts

Staff online

Members online

Total: 470 (members: 11, guests: 459)
Robots: 1,145

Forum statistics

Threads
195,557
Posts
2,871,842
Members
156,319
Latest member
amdwilsns01

Share this page

Top