Recent content by oldmitch

  1. oldmitch

    How To: Add Factory Keyless Enter N Go

    I tried doing that, back in the way-back, with no luck. I switched the clutch wire on the connector, to the "park signal" location, and that didn't work (I think because clutch is a ground, and park-signal is not?). I even pulled a pin out of the old RF hub, and put it in the pin7 location on...
  2. oldmitch

    How To: Add Factory Keyless Enter N Go

    I added keyless enter n go to my manual truck. But I mistakenly bought the RF hub for an auto truck (based on a parts list I saw on here, a couple years ago). My truck wouldn't start without a pin 7. As you know, the auto hub doesn't have a pin 7. So I just added some switches and relays to send...
  3. oldmitch

    Jump seat with heat rear seats

    Anyone with factory REAR heated seats: any chance you could snap a picture of your C6 connector, from the seat temperature module? The connector associated with that part number on AllDataDIY, doesn't look like the socket on the module. I'm hoping that the actual connector will have an...
  4. oldmitch

    Gauge Cluster Color Change

    Did you ever do any modding to the cluster LEDs? We're you able to find out any part numbers?
  5. oldmitch

    Interior switch / controls led color change, gauging interest

    Seeing as there's lots of folks digging into their dash controls, and instrument clusters... Does anyone have a pile of the stock, blue-ish LEDs laying around? If so, can I take them off your hands? Or perhaps a part number, so I can order them in bulk? OR the white LEDs used on the limited...
  6. oldmitch

    How To: Add Factory Keyless Enter N Go

    Just crawl under your truck, and look at your starter. There's a small gauge wire that a activates the starter solenoid. You can cut/splice that wire with whatever kind of killswitch suits your fancy. Or you can buy a Ravelco anti theft device, if you have $500 bucks laying around.
  7. oldmitch

    How To: Add Factory Keyless Enter N Go

    @Jimmy07 Are you still building harnesses? If so, I'd like to buy some from you.
  8. oldmitch

    How To: Add Factory Keyless Enter N Go

    Let me know if it works. I might be interested in getting the right parts, someday.
  9. oldmitch

    How To: Add Factory Keyless Enter N Go

    Nice! Let me know if it works! Sorry, I didn't take any pictures while I had it all apart. And I don't have time to tear it all apart again. All I did was remove the fuse box, and pull the the wire that goes from the starter relay, down to the starter. It's a 12ga wire, yellow, with grey...
  10. oldmitch

    How To: Add Factory Keyless Enter N Go

    I didn't end up ordering it. I just used what I bought. It turns out the ONLY thing keeping it from working was the hub not knowing that it was safe to turn the engine over (neutral safety switch vs clutch safety switch). SO, I just disconnect the yellow/grey starter wire from the bottom of the...
  11. oldmitch

    Manual transmission WITH keyless go?

    Anybody have an '18 Cummins, manual transmission, with keyless go function? I'm trying to track down the part number for the correct RF hub, to make my truck have push button start.
  12. oldmitch

    How To: Add Factory Keyless Enter N Go

    Thanks for finding that. Anyone interested in buying my brand new RF hub, and 3 linked key fobs?
  13. oldmitch

    How To: Add Factory Keyless Enter N Go

    @Jimmy07 The one listed as the replacement for the one you have in your original post. 68319680ae I have to assume that there's a factory option, if the EVIC has the "Push clutch + Start" display
  14. oldmitch

    How To: Add Factory Keyless Enter N Go

    And by "yes" I mean "no" There is no pin on the RF Hub in position 7. I'm hoping that's the way it SHOULD be? @Jimmy07
  15. oldmitch

    How To: Add Factory Keyless Enter N Go

    Yes
See more

Latest posts

Staff online

Members online

... and 43 more.
Total: 1,379 (members: 93, guests: 1,286)
Robots: 1,470

Forum statistics

Threads
195,564
Posts
2,871,941
Members
156,330
Latest member
Jeph430

Share this page

Top