Recent content by oldstyle17

  1. O

    Zone/bds tie rod ends

    I grease them every oil change. So around every 10k miles. First set the boots ripped. These just seem to have wallered out a bit and the joint seems loose Sent from my iPhone using Tapatalk
  2. O

    Zone/bds tie rod ends

    Yes inners are good. They were replaced last time I replaced the outers. But it’s sounding like I’m just going to have to order bds ones and put them on again..... Sent from my iPhone using Tapatalk
  3. O

    Zone/bds tie rod ends

    I have the zone UCA but the ball joints aren’t bad. I ripped the boots a bit ago and replacing them. But the tie rod ends seem to be what’s wearing out prematurely. All angles seem to be good. I get regular alignments and tire rotations. Sent from my iPhone using Tapatalk
  4. O

    Zone/bds tie rod ends

    Truck does a bit of everything, tows, hauls, used around my property to move stuff Around, take it to some local off-road parks. Sometimes it’ll be black gumbo, other times soft soil/mud and sometimes might be hard as concrete out there. Not doing any rock crawling or anything. And speed varies...
  5. O

    Zone/bds tie rod ends

    They just seem to be wearing out a bit faster than they should be, and I don’t really like the idea if I need one I have to order it and wait for it. Was hoping there would be an upgraded equivalent I could go pick up in store or order a legitimate upgrade that I wouldn’t have to worry about for...
  6. O

    Zone/bds tie rod ends

    I have already replaced with the bds/zone tie rod end twice now, and looking to upgrade to something a little heavier duty. I ordered some not thinking about the tapered end being different and now I’m finding out they’re not gonna work. Was hoping for an upgraded part to freshen up my entire...
  7. O

    Zone/bds tie rod ends

    This will be my second time needing to replace my tie rod ends on my truck. Originally installed as a 4” zone kit with 3” rear lift. It’s adapted and changed over time. However what I am looking for is any info on ball joints that work that are not zone/bds? Does anyone know a cross reference or...
  8. O

    Mevotech TTX series front end parts

    I ordered those off of eBay and got a message they are out of stock and 2-3 weeks until it would ship at the soonest.... and okay thank you. I ordered the lower ball joints and outer tie rod ends, but can’t seem to get the upper ball joints and I have the zone UCA’s but now debating just...
  9. O

    Mevotech TTX series front end parts

    Has anyone used the mevotech TTX front end parts? Do they actually seem “heavy duty” or like upgrades to stock? Also can anyone locate txms25563 upper ball joints? I can’t seem to find them anywhere in stock Sent from my iPhone using Tapatalk
  10. O

    2016 Ram 1500 power fold row mirror

    Thank you! Sent from my iPhone using Tapatalk
  11. O

    2016 Ram 1500 power fold row mirror

    Benny any chance it’s possible to get power fold row mirrors for my 1500? Has standard power fold on it now. Not worried wether it’s chrome or black or paint matched. Just whatever is cheapest option if possible Sent from my iPhone using Tapatalk
  12. O

    Help a brother out, Superlift or BDS

    I recommend 6” beds with the fox. I have the Fox coilovers and my truck rides as close to a Cadillac as a truck can. It still pulls great, hauls pretty alright bad drives beautifully. I started with a 4” and converted to 6” because of the cv axle angle. Also if your considering a lift or a level...
  13. O

    4” Coilover kit

    Your options are the Fox coilovers suggested or go with a American expedition lift kit. Those are the only ones I’ve seen that don’t use spacers. I started with a 4” zone and am basically running a 6” bds at this point. But I originally had the Fox coilovers on with the 4” and adjusted it to...
  14. O

    Zone UCA's with 4-6" lift

    I’m very confused by this thought. How is there any difference in uca angle when using a spacer or coilovers? Your still pushing the height one way or the other and changing the angle of the uca? Sent from my iPhone using Tapatalk
  15. O

    4” lift thinking of going back to stock

    Well, the saga has continued!! But after 5.5 weeks at another dealer I went and picked it up myself. Decided to pull the cv axles and front drive shaft and took it for a drive and it doesn’t make a peep!!! Guess it is the front diff!! Hopefully a call to the dealer and they will be replacing it...
See more

Latest posts

Staff online

Members online

Total: 1,311 (members: 45, guests: 1,266)
Robots: 1,809

Forum statistics

Threads
195,480
Posts
2,870,831
Members
156,199
Latest member
Neilr5515

Share this page

Top