Recent content by Outback199
-
INFO - 2013-2018 8.4A /AN FW Notes (RA3/VP3-NA & RA4/VP4-NA & UAx)
Ok - ready the thread @Mpgrimm2 referenced - beyond my risk tolerance. I would like to clarify - that its not so much a reboot - but while driving (like yesterday) The radio will stop responding to input. Volume commands, power button etc... but the SXM is still producing audio. After about...- Outback199
- Post #1,465
- Forum: 4th Gen DIY
-
INFO - 2013-2018 8.4A /AN FW Notes (RA3/VP3-NA & RA4/VP4-NA & UAx)
No - I'm at 22.06 - how does one obtain a copy of wither 30.24 or 34.2?- Outback199
- Post #1,462
- Forum: 4th Gen DIY
-
INFO - 2013-2018 8.4A /AN FW Notes (RA3/VP3-NA & RA4/VP4-NA & UAx)
This is the version I'm running now... radio reboots often. More so after using car play. I'm looking for a solution!- Outback199
- Post #1,460
- Forum: 4th Gen DIY
-
DIY: 2013-2017 RA3/RA4 8.4" Radio Upgrade/HVAC Conversion
Finally - the upgrade that started almost a year ago, is finished and working correctly! I have @Mpgrimm2 and M2 Mods to thank. I didn't buy from him from the beginning, wish I had - but I've removed the previous vendors harness, and used his (which he shipped in about a day after placing the...- Outback199
- Post #269
- Forum: M² Mods
-
DIY: 2013-2017 RA3/RA4 8.4" Radio Upgrade/HVAC Conversion
I appreciate you taking the time to reply - believe me, if I could turn back time - I would have bought from you. I found this group after I had issues. I will attempt your test. Do you believe this is because I don't have a humidity sensor? If I switch to your harness, and add the sensor...- Outback199
- Post #239
- Forum: M² Mods
-
DIY: 2013-2017 RA3/RA4 8.4" Radio Upgrade/HVAC Conversion
Support issue raised... no reply yet.- Outback199
- Post #237
- Forum: M² Mods
-
DIY: 2013-2017 RA3/RA4 8.4" Radio Upgrade/HVAC Conversion
What year truck? 1500? 2019 Ram Classic What year/model/PN radio? What HVAC module pn are you using? HVAC module (P68366552AA) Wire harness (assume made by Infotainment) USB Media Hub 8.4 Radio (68331631AK) Did you add ATC Temp Sensor only or Temp and Humidity Sensors? (depends on your truck...- Outback199
- Post #235
- Forum: M² Mods
-
DIY: 2013-2017 RA3/RA4 8.4" Radio Upgrade/HVAC Conversion
Hello hive, With your support I have been enjoying a 8.4 upgrade and ATC for the part 6 months. It's been working flawlessly. Recently, I purchased powerfold mirrors, with turn signal and puddle lights. I bought the switch, and two modules as explained in guides here (thanks again). Before...- Outback199
- Post #233
- Forum: M² Mods
-
HVAC problem with UAS upgrade in '18 truck
Will do - however - I've already replied back asking if the genies were going to work without a Security Module Bypass - I've heard nothing back yet. Assuming the humidity sensor isn't required?- Outback199
- Post #155
- Forum: Interior
-
HVAC problem with UAS upgrade in '18 truck
Sorry man - I didn't know about you or your products before I bought from them. Like most, I went searching for answers after their solution failed. When they called, I had pulled the whole system out of the truck, and was ready to send it back. (Forego a 15% restocking fee)- Outback199
- Post #151
- Forum: Interior
-
HVAC problem with UAS upgrade in '18 truck
***UPDATE!!!!*** I just got off the phone with Nick at Infotainment! I explained the issues that I was having, and described in detail how the "forum guys" say that the fix is to add ATC, and sensors... He asked to call me back, after he talked to the lead tech (who was on vacation last time...- Outback199
- Post #144
- Forum: Interior
-
HVAC problem with UAS upgrade in '18 truck
I have a new curve ball... I can get the slider to work for a few hours, until I let the truck sleep. After a period of a couple of hours it reverts back. I've now determined all I have to do is plug my OBD reader into the port, I don't read, clear or even connect to it (BlueDriver). Next...- Outback199
- Post #143
- Forum: Interior
-
HVAC problem with UAS upgrade in '18 truck
After 3 hours, went back to the truck and started it. Lost my fine temp control again. AGAIN - I hooked up my OBD reader, and AGAIN, the same two codes came up. I cleared them, as I did before, turned the truck off, waited. Back on, and temp control is working again... I hope I'm not living...- Outback199
- Post #142
- Forum: Interior
-
HVAC problem with UAS upgrade in '18 truck
This would require the purchase of a few other pieces of hardware if I've read correctly, right? A temp sensor, and potentially a different bezel (or the fan control within)- Outback199
- Post #140
- Forum: Interior
-
HVAC problem with UAS upgrade in '18 truck
UPDATE: Using my BlueDriver OBD reader I did a full system scan. I saw two old codes still present from the bad cable install: U0010 - CAN Interior Bus U0164 - Lost Communication With HVAC Control Module I cleared both errors. Tuned the key to off. Open and closed the driver door. Waited...- Outback199
- Post #139
- Forum: Interior
Members online
- hdog33
- Bill Erb
- ebirotedu
- RebelMojave
- PPX Dually
- ILLXJ
- rule18
- baumann6
- Nbarron
- Nick@GotExhaust
- Spud2388
- c85jl
- Baja1
- huntergreen
- Walcha80
- G-Ride990
- rotorman2000
- AZ MARK
- colthe
- abouttobeglue
- kacz81
- xkraz
- MOPAR78
- SoFLRam
- jws123
- jdbird93
- Yogee2020
- demolition521
- crackerjack1957
- Flip-er
- Bmags
- DanRam54
- BenWade
- Neilr5515
- mvmike
- Ks33
- Maniac
- Smokeybear01
- shakey32
- KyleCross1468
- Wild one
- bottomtime
- photoguynorth
- fireflymedic
- johnb555
- Gstrat
- AllMoparParts.com
- mtofell
- diymirage
- Lsujker