Recent content by Paul Prince

  1. Paul Prince

    Check Engine Light Help

    Update on this subject. I checked the tranny fluid in truck before starting up. The level on the dipstick is just below the hot mark. I started the truck and check engine light still on so I shut it down. I disconnected both negative cables from battery for about 5 min. Reconnected and started...
  2. Paul Prince

    Check Engine Light Help

    Thanks to both of you For replying. I will measure what came out later today and adjust accordingly. I’ll get it up to operating temp and check level. The transmission seemed to function as normal (although I didn’t get up to no more than 15 mph). It went into drive and reverse with no funny...
  3. Paul Prince

    Check Engine Light Help

    Good evening folks. Need some help please. I have a 3500 with Cummins and Aisen transmission. I did a fluid and filter change this evening. I went to start up truck when done and after wait to start light went off a 4 wheel dr temporary disabled came on the screen. It Was only on for 2-3...
  4. Paul Prince

    Rust Freckles on Chrome Clads

    I used Norwex paste cleaner on mine. Looked like brand new when done.
  5. Paul Prince

    New Ram with Cummings Questions

    Sorry. The transmission dipstick is on the drivers side.
  6. Paul Prince

    New Ram with Cummings Questions

    I will look under the truck tomorrow for the data plate on the transmission and the engine. The transmission dipstick is on the right. I just watched a video that showed the Aisin transmission with the dipstick on the right.
  7. Paul Prince

    New Ram with Cummings Questions

    Sorry for that mispelling . I guess some auto spell crap got me. I would never want to cause the Cummins name shame.
  8. Paul Prince

    New Ram with Cummings Questions

    Thanks. I didn’t think so. I was trying to find two ratings with this configuration but haven’t yet.
  9. Paul Prince

    New Ram with Cummings Questions

    Good evening. Just recently bought a pre owned 2018 Ram ST 3500 SRW with the 6.7L Cummings. My build sheet says I have the Aisin transmission but I don’t think I have the HO engine. Is that possible?
Top