Recent content by PaulSwany

  1. PaulSwany

    ABS / Stability Control problem. 2010 Ram 1500

    Anyone have experience with this scanner? https://www.ebay.com/itm/155744890287?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=MlukPZVZTSO&sssrc=4429486&ssuid=AJOJCA-YTry&var=&widget_ver=artemis&media=COPY
  2. PaulSwany

    ABS / Stability Control problem. 2010 Ram 1500

    I have a cheepy scanner, can you suggest one that would show live data from each wheel?
  3. PaulSwany

    ABS / Stability Control problem. 2010 Ram 1500

    I've read countless threads on here relating to ABS problems with the RAM 1500 truck. I don't wanna just throw parts at it, so I'm trying to find what to check. My symptoms: Stability Control light comes on intermittently with the front brakes locking up randomly. What I've done so far: I...
  4. PaulSwany

    2010 Dodge 5.7 Hemi rebuild

    I went stock with everything. Didn't really want to give it more power... Just want it to have the best chance of survival under my son's heavy right foot.
  5. PaulSwany

    starter problems

    Nail on the head.... I looked down there a few times and it just looked like bracketry to tidy up the harness.... But the big lug was just danglin.... :oops::oops:
  6. PaulSwany

    2010 Dodge 5.7 Hemi rebuild

    Video of the first start up. https://drive.google.com/file/d/1iLDcVEDTwsgRqQlypgwEwKoqPFChtw1l/view?usp=sharing
  7. PaulSwany

    2010 Dodge 5.7 Hemi rebuild

    Got it in and running!
  8. PaulSwany

    2010 Dodge 5.7 Hemi rebuild

    Continued
  9. PaulSwany

    2010 Dodge 5.7 Hemi rebuild

    Just finished rebuilding my 5.7 Hemi. Thought I'd post some pictures of the process.
  10. PaulSwany

    starter problems

    Well, I'm a dummy. It turned out to be the main battery ground that attaches to the engine. Got that connected, and she fired right up!
  11. PaulSwany

    2010 Ram 1500 TIPM

    My 2010 Ram 1500 was in a front end collision before I got the truck. Seems that the TIPM enclosure on the drivers side isn't quite right. The panel doesn't click into the box and there's an external plug that seems like it needs a home. I wondered if I can get some good pictures of a stock...
  12. PaulSwany

    starter problems

    I found that the engine ground on the back of the block was broken where it connects to the body, so I ran a wire directly to the negative on the battery, but still no dice. I'm gonna replace it and pull the plugs to see if I can at least get the motor to turn over.
  13. PaulSwany

    starter problems

    Just finished rebuilding my 5.7 hemi in my 2010 1500 truck. Got it all ready to start and I get a click and the starter gear engages, but nothing else. The battery tests good under load and the starter seemed to work find on a bench test. Tried a new starter and same problem. I pulled the...
  14. PaulSwany

    VVT Cam Gear

    This engine had a spun rod bearing, so I was worried some shrapnel got in the cam phaser... But it looked pretty good, and I cleaned it very well, so hopefully I won't have any issues with it.
  15. PaulSwany

    VVT Cam Gear

    I just watched a video of a phase limiter installation and it looks like all there's just a big spring in there. Don't wanna mess with that, just wanna make sure I clean it really well.
See more

Latest posts

Members online

... and 6 more.
Total: 1,311 (members: 56, guests: 1,255)
Robots: 1,425

Forum statistics

Threads
195,591
Posts
2,872,190
Members
156,371
Latest member
MMME

Share this page

Top