Recent content by ramrocker

  1. ramrocker

    Rear ended twice in two days

    Rear ended a couple weeks ago at stop light. The other driver had no drivers license, and my insurance said he had no insurance. Looks like the F250 had several hits before he nailed me. The hit took out my bumper, tailgate, hitch, rear camera lens.
  2. ramrocker

    Reverse wire

    Body Control Module to Fuse Box, F27 for trailer tow reverse. Body Control Module drives Lamp Drivers for the lights. Diagrams at https://www.ramforum.com/threads/my-2013-shared-schematics-and-other-oem-info.86768/
  3. ramrocker

    Trailer Battery charge while towing?

    I pulled F29 and put a voltmeter on it. I see 12V when I turn on the parking lights. So if it's not there, then the internal relay probably has a problem.
  4. ramrocker

    Cabin water leak other than brake light or window

    The louver flaps are not split across like the original. The outer seal is a bit different along with the latches that hold it in place. Click For Full-Size Image. Click For Full-Size Image.
  5. ramrocker

    Cabin water leak other than brake light or window

    When I bought last 6-2019 it was: Manufacturer: Mopar Part Number: 68323649AB Part: Pressure Vent Replaces: 68157351AC, 68157351AD, 68323649AA
  6. ramrocker

    How to Add Automatic Temperature Control (ATC) to a Manual Temperature Control Truck

    I had the knee kick panel off today. Didn't know what the sensor mounted on it was so started searching. Found this thread. Wouldn't have guessed it was a temperature sensor.
  7. ramrocker

    ROLL-UP INFO: FOTA 18.11.x & uC D/L 18.45.01 SW Update 13-17 RA3/Vp3-NA & Ra4 VP4-NA

    I had version 16.23.21, downloaded the 18.45.01 update to USB today. It failed on the IOC-Bootloader unit twice. Figured it was going to not work. Yanked the USB drive when it reset 3rd time and copied the download onto an older USB drive. Don't know if that made any difference using the older...
  8. ramrocker

    Humidity and water drops inside the front windshield after rain & sun

    The water drains out of the cowl near each hood hinge. The cowl's grille openings let air into the cabin via the air intake housing. That housing's opening is just above the cabin air filter that's behind the glove box.
  9. ramrocker

    What is this wiring bundle behind the headlight?

    Jimmy07 beat me to it, I was just looking thru the 2016 Upfitter Schematic. I've got those same cut wires with heat shrink. No upfitter switches.
  10. ramrocker

    Humidity and water drops inside the front windshield after rain & sun

    Water getting in the fresh air normally drains out the left and right sides. The hood liner may be getting water dripping on it from the washer nozzles. They just snap in the hood. That's what mine were doing.
  11. ramrocker

    ROLL-UP INFO: FOTA 18.11.x & uC D/L 18.45.01 SW Update 13-17 RA3/Vp3-NA & Ra4 VP4-NA

    I've seen the update notification a few times lately, haven't been prompted to schedule the update. I've let mine lag behind, currently at 16.23.21. The radio and cameras still work so I'm OK with that. Checked driveuconnect.com today and it tells me my vehicle is up to date. I guess that's b/c...
  12. ramrocker

    Humidity and water drops inside the front windshield after rain & sun

    Sunroof drain tubes run down the cab corners, exit rear wall to the side of the vents. Left Right
  13. ramrocker

    Humidity and water drops inside the front windshield after rain & sun

    I think my rear cabin vent leaking just a bit had caused fogging of windshield after rain. Cabin water leak other than brake light or window
  14. ramrocker

    Key Fob Button Protector/Cover??

    This leatherman cut way down on my accidental button presses. Cut the flap off, Stretched it just a bit with a wood blank. LEATHERMAN - Heritage Leather Snap Sheath for Multitools, Medium. This leatherman cut way down on my accidental button presses. Cut the flap off & it slips in my pocket...
  15. ramrocker

    Cruise control

    Try pressing down the cruise control on/off button and at same time press & release set button. It was a pita when it stopped working till I found that tip.
See more

Latest posts

Members online

... and 23 more.
Total: 1,432 (members: 73, guests: 1,359)
Robots: 1,945

Forum statistics

Threads
195,596
Posts
2,872,323
Members
156,401
Latest member
jesmich

Share this page

Top