RedSRT4Me
Senior Member From Scottsdale, Az
- Joined
- Posts
- 2,697
- Reaction score
- 2,045
Latest activity Postings About
-
-
RedSRT4Me replied to the thread Replacing / Upgrading the alternator.I think the highest you can tune for is 320 looking at settings. Don't know anyone who has swapped one successfully yet. By successful... -
RedSRT4Me replied to the thread Acceleration studders.Start with the easy stuff. Change your u-joints and go from there.
-
RedSRT4Me replied to the thread Front suspension questions.You'll want to do a full front end rebuild. Upper/lower arms Inner/outer tie rods Shocks if needed.
-
RedSRT4Me replied to the thread Pre-Lubing Hemi Engines after lack of use.This really should be stickied!! This process is so valuable to the engine. More people should know it.
-
RedSRT4Me replied to the thread 2012 Ram 1500 hemi sport cranks no start.Codes?
-
RedSRT4Me reacted to HEMIMANN's post in the thread Pre-Lubing Hemi Engines after lack of use with
Like.
Today I wanted to test Hemi engine pre-lube functionality without AlphaOBD or other tuning. It was mentioned elsewhere in the Forum... -
Got my Underground Lighting HID kit yesterday in 6000k. They made a huge difference! The install was straight forward. Initially the...
-
RedSRT4Me reacted to Tach_tech's post in the thread 4th gen EVAP leak detection pump test with Like.
If that video says that he is wrong. The ESIM works off vacuum, depending on the state of the system the plunger in the ESIM will be in...
-
New member here - Thanks for all the HID and AlfaOBD threads and advice. I went slow - about 2 hours total. Installed basic Innovited...
-
RedSRT4Me replied to the thread Valve spring installed height.1.99 seams to be the magic number for 09+ Found someone's photo referencing the numbers
-
-
RedSRT4Me reacted to Wild one's post in the thread Oil Leak issue 5.7 intake manifold - Maybe? with Like.
96 in-lbs/ 8 ft-lbs ,I use a 1/4" drive rachet and just go snug on them
-
RedSRT4Me replied to the thread Oil Leak issue 5.7 intake manifold - Maybe?.Question for anyone who would know. New Injector O-rings aren't out of the question and for my case could be a good idea. Anyone know...
-
RedSRT4Me reacted to c713's post in the thread Oil Leak issue 5.7 intake manifold - Maybe? with Like.
Hey. Thanks for the quick replies. So good idea as to wash the engine and put new valve covers. Like I said before, we have been in...
-
RedSRT4Me reacted to Wild one's post in the thread Oil Leak issue 5.7 intake manifold - Maybe? with Like.
Instead of gooping everything up with gasket maker,i'd pull the valve covers and put all new gaskets/seals in them.I'd also run it...
-
RedSRT4Me reacted to c713's post in the thread Oil Leak issue 5.7 intake manifold - Maybe? with Like.
Hey. So here I an back with an update. As stated above. I sealed all the seams in the 3rd intake that I have now where it's been...
-
-
Loading…
-
Loading…
Staff online
-
G-Ride990Administrator
Members online
- Dean2
- Jerrybob
- pboulianne35
- Broken
- Zoe Saldana
- Spindrifter
- Phirebeard
- Makin-Chips
- Nols
- TJW961
- MyTruck
- Dan Topp
- Cesar592
- aeromax4
- CJ Tex
- DiontePerkins
- salarguy
- Joe ouyen
- jawzs2
- imcoldhere
- ColesRAM
- RamDiver
- Dinky
- dwade
- Matt Bell
- LukusCA
- Ramisgood
- JoshsRam
- GrizzlyMedic
- Kaypro
- RumRunner
- Torresnator1936
- RAZ175
- Udy2554
- john55
- aRBee4863
- Kr0ss
- GRKN
- Stever39
- Wild one
- nwhunter55
- stevenP
- toddmakesamove
- wieseman33
- huntergreen
- JJP71584
- Dan J
- G-Ride990
- boomer_rich
- benb1976