Recent content by Remen

  1. R

    ROLL-UP INFO: FOTA 18.11.x & uC D/L 18.45.01 SW Update 13-17 RA3/Vp3-NA & Ra4 VP4-NA

    For those who may want to update their 8.4 map. Just checked the Uconnect site for the VP4 update and current price for the 2020 NA version is $99 with free shipping until 7/2/21.
  2. R

    ROLL-UP INFO: FOTA 18.11.x & uC D/L 18.45.01 SW Update 13-17 RA3/Vp3-NA & Ra4 VP4-NA

    Just wanted to confirm that I can update my 8.4 using a downloaded zip file(Ver 18.45.01) from a different VIN or from the shared zip file on mediafire referenced on this forum. There was a note on the uconnect site not to use the firmware with any other VINs. I apologize for the way I worded...
  3. R

    2019 Tow Mirror Wiring

    I will compare the 2017 schematic with the one you have shared. Thank you!
  4. R

    2019 Tow Mirror Wiring

    In search of schematic for the subject part. As I understand the pinouts have changed compared to the 2017 mirror connector. Has anyone installed tow mirrors without power fold from a 2017 1500 to a 2019 2500?
  5. R

    WTB: Overhead Console with Homelink

    I cut out the rectangle as described but bought the Homelink/Compass module on eBay.
  6. R

    Tire size change alfaOBD

    For those considering changing to different wheels thought I’d share the difference in appearances to my 1500. The original style. The new style. I like the look of these new wheels!
  7. R

    Tire size change alfaOBD

    I just installed 20” Laramie wheels and tires on my 1500 and had the same issue. I followed instructions and on the last step got the same failure message when trying to clear rolls info. I tried twice without success until I changed the last step in the process. After Static ECU Initialization...
  8. R

    How to: Add Dual Zone ATC to a Tradesman

    The process involving the modification works and relatively inexpensive. My case was unusual and work intensive due to the HVAC module failure. Thanks again to STecoD, Ricks Ram, and jimmy07 for their support in this venture.
  9. R

    How to: Add Dual Zone ATC to a Tradesman

    Monday ordered the HVAC module and it arrived today. It took all of 15 minutes to R/R the module and test the system. These are the results: Dual mode working normally. Ran control functions and temperature settings and now system cools and heats as expected. Success! The original HVAC...
  10. R

    How to: Add Dual Zone ATC to a Tradesman

    Sunday I rewired the actuator plug to the grey plug and checked continuity with positive results. Reinstalled the passenger temp actuator and used the troubleshooting guides provided by jimmy07 to pinpoint location of the HVAC issue. All the wiring checked normal but error codes B11C8 and B11C9...
  11. R

    How to: Add Dual Zone ATC to a Tradesman

    After family visits and other necessary events I was finally able to resume troubleshooting the HVAC issue last Saturday. To confirm that the actuator wasn’t binding I decided to remove the panel. l followed the same steps as before to disconnect and remove the actuator and confirmed the...
  12. R

    How to: Add Dual Zone ATC to a Tradesman

    Didn’t start troubleshooting until this afternoon. Cleared the codes and calibrated the actuators. Got the same fault codes again. Decided to replace the wire from the HVAC module to the grey inline plug. Just in case the pulse rate is being influenced by the type wire, used aircraft grade wire...
  13. R

    How to: Add Dual Zone ATC to a Tradesman

    Thanks! Looks like I'll be busy tomorrow..
  14. R

    How to: Add Dual Zone ATC to a Tradesman

    That would be awesome! When I replaced the actuator I made sure the blend door wasn't binding throughout it's travel.
  15. R

    How to: Add Dual Zone ATC to a Tradesman

    Here are snapshots of HVAC module test results. Maybe a bad module? Wiring harness tested good.
See more

Latest posts

Members online

Total: 343 (members: 10, guests: 333)
Robots: 1,127

Forum statistics

Threads
195,469
Posts
2,870,597
Members
156,178
Latest member
mmcquinn

Share this page

Top