Recent content by RTom

  1. RTom

    Electrical rear window upgrade

    a Finally got it all wired up correctly. When I bought my overhead console it came with the wiring harness out of a bighorn. However, my truck being a Tradesman did not have the correct wiring at any of the terminals. I ended up separating the wiring harness. I ran the tan/orange and tan/brown...
  2. RTom

    Electrical rear window upgrade

    So, I bought the correct wiring repair kit for connecting the overhead harness to the slider motor. Trying to figure out how to wire it up now. I’m assuming these terminals slide into the appropriate spots in the plug in the passenger side c pillar. this is the back half of the plug for...
  3. RTom

    Electrical rear window upgrade

    this is my passenger c pillar area. I think I should have wiring that runs from here to the connector on the motor that I’m missing. Connector on rear motor
  4. RTom

    Electrical rear window upgrade

    I added the over console and wiring last year. I had the back glass installed today. I thought I had the connector to go to the motor for the back glass but apparently do not. Do you guys know if it ties into the plug on the driver or passenger side C Pillar?
  5. RTom

    (SOLD) RA2 Radio + 7-Spd Bezel $165 Shipped

    PM sent
  6. RTom

    Installing OEM backup cam

    :cheers: Ended up being a bad fuse. I appreciate you helping - always good information when I read your posts. Thank you!
  7. RTom

    Installing OEM backup cam

    Thank you guys for your help. Dawned on me this morning I had double checked everything but the fuses. I’m taped into the reverse wire for the trailer plug and that fuse was bad. Swapped it out and now have back up camera.
  8. RTom

    Installing OEM backup cam

    Here is the pic of the plug
  9. RTom

    Installing OEM backup cam

    I tied into the reverse wire in the trailer plug. I’ll take a pic when I get home of the plug. Thank you!
  10. RTom

    Installing OEM backup cam

    I’ve double checked all connections and that I’ve got it in the correct pins and I do. I guess I’m ordering a new camera now.
  11. RTom

    Installing OEM backup cam

    Ended up purchasing an aftermarket back up camera with a RCA plug from a member as well as a connector to plug the RCA plug into the back of the radio plug. Had the the dealership flash the truck (with XAC) and now have a blue screen. I double checked my connections. My understanding from...
  12. RTom

    AlfaOBD

    I haven’t been able to get past it yet. Wondering if I just have to have the dealership flash it instead ?
  13. RTom

    AlfaOBD

    Thank you SitKneelBend - was able to get it all connected now. Trying to activate the rear view camera I installed in my truck (2015 Tradesman with a RA2) but when I go to select the gridlines it says "This option is not supported by the body computer modification" - does this mean it is...
  14. RTom

    AlfaOBD

    When I try to connect via AlfaOBD to my OBD2 scanner (which I've successfully done in the past) I'm now getting an error that reads: "Error opening port. You were not connected because a duplicate name exists on the network. If joining a domain, go to System Control Panel to change the computer...
  15. RTom

    2015 Keyless Entry Receiver

    I did not know that. We can go ahead and close this then. Thank you!
See more

Latest posts

Members online

... and 7 more.
Total: 1,808 (members: 57, guests: 1,751)
Robots: 1,538

Forum statistics

Threads
195,492
Posts
2,870,984
Members
156,217
Latest member
FRCC

Share this page

Top