Ryno1500
Reaction score
44

Latest activity Postings About

    • Ryno1500
      Ryno1500 replied to the thread 8 speed swap.
      That’s the story I’m hearing. I have the white connectors, so I have to do a ECU swap and have someone tell me how to reprogram the vin.
    • Ryno1500
      Ryno1500 replied to the thread 8 speed swap.
      Nice! I'm still debating, do I dive in or pull the trigger on a new truck.
    • Ryno1500
      Ryno1500 replied to the thread 8 speed swap.
      You will pull your center bezel and replace the transfer case dial with a combo switch.
    • Ryno1500
      Ryno1500 replied to the thread 8 speed swap.
      From what I’m seeing, there’s a jumper cable that connects to the wiring harness behind the dash. Pretty sure it’s already there for my...
    • Ryno1500
      Ryno1500 replied to the thread 8 speed swap.
      That makes sense then. Yeah, I’ve pulled my bezel a few times and never thought to look. Either way, you should be able to run the...
    • Ryno1500
      Ryno1500 replied to the thread 8 speed swap.
      Interesting. I would think on ECMs, where the 8HP is a factory option and you’re not having to use SGA, you would be able to use the...
    • Ryno1500
      Ryno1500 replied to the thread 8 speed swap.
      Maybe this isn’t as critical, but wouldn’t you also need to change the steering wheel to one with drive gear selectors.
    • Ryno1500
      Ryno1500 replied to the thread 8 speed swap.
      I just looked at my connectors on the ECM, all white. So I guess my options are a new ECM and harness or the SGA set up. I suppose the...
    • Ryno1500
      Ryno1500 replied to the thread 8 speed swap.
      FRP Tuning may have the answer to make it all talk. Just came across them.
    • Ryno1500
      Ryno1500 replied to the thread 8 speed swap.
      That makes sense, I hadn't looked at the column in depth enough to see how integrated the shifter was.
    • Ryno1500
      Ryno1500 replied to the thread 8 speed swap.
      That's about what I'm seeing, besides flexplate, pilot bushing, and drive shaft. Suppose a new steering column as well unless you want...
    • Ryno1500
      Ryno1500 replied to the thread 8 speed swap.
      Ok, that’s what I thought. Trying to then figure out what I would need to complete the swap on a 2014 4x4. Would I just need the factory...
    • Ryno1500
      Ryno1500 replied to the thread 8 speed swap.
      What are you all referring to exactly with the brown ECM plug?
    • Ryno1500
      That’s been my original plan, but I’m going to have to buy something new per my job. Was going to get a new Jeep, but then I started...
    • Ryno1500
      Made the mistake of looking at new Rebels yesterday, and thinking about trading in my 2014. Which engine are you all preferring, best...
  • Loading…
  • Loading…
Top