Recent content by scott_intx

  1. scott_intx

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    The correct clock spring should be in the column. I did the same thing, however I discovered they spun the steering wheel and broke the clock spring. They ended up selling me the steering wheel for $45. I bought a used clock spring for $70. Sent from my iPhone using Tapatalk
  2. scott_intx

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    I recently added the heated clock spring and steering wheel. Options were turned on with Alpha, but both the hard button and soft buttons on the radio temporarily turn on, then back off. Any ideas as to what might be causing that? All other steering wheel controls function properly and I know...
  3. scott_intx

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    This is what the connectors look like. I was thinking it was the white one on the bottom. I got the latest version of the seat interface module and it didn't change anything. I even turned off all the settings, gave it a couple of days and re-enabled them. About a week later I found a setting...
  4. scott_intx

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    I have a steering wheel from a 2017 that is supposed to be heated. The P/N is missing. Is there anyway to identify a heated from a non?
  5. scott_intx

    UPDATE: Radio Upgrade?

    New or used (what I have) the hotspot will activate. Nav is standard on the UAQ. Sent from my iPhone using Tapatalk
  6. scott_intx

    Bighorn to Laramie seat conversion ***Help please***

    This is the old vs new module. Sent from my iPhone using Tapatalk
  7. scott_intx

    Bighorn to Laramie seat conversion ***Help please***

    From other posts, they would show up with seats from a 2016+ I have a feeling it has to do with them being from a 2014. That’s why I installed the newer module. Sent from my iPhone using Tapatalk
  8. scott_intx

    Bighorn to Laramie seat conversion ***Help please***

    It’s been over a week. The new heated seat module is same p/n for a 2012-2019, just an AF instead of AA suffix. Software is newer, too. Sent from my iPhone using Tapatalk
  9. scott_intx

    Bighorn to Laramie seat conversion ***Help please***

    Need some help. I have a 2016 Bighorn that started life with the 8.4” RA4. I converted to a 2019 Classic UAS and it works great. I put in the heated/vented seats from a 2014 Laramie. Seats function properly with the factory switch panel installed. The soft icons won’t appear in the radio even...
  10. scott_intx

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    Patience is the key. I also managed to score a complete set of CC Laramie seats for $440 out the door and a 32gal gas tank for $75, and a LED camera 3rd brake light for around $120.
  11. scott_intx

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    This was like 15mins and a scrap of ABS plastic. I didn't even have to paint it. Your's does look good though. I just didn't have all that extra time to spend on it.
  12. scott_intx

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    Just wait on it. I managed to score one for under $550 and it was in perfect condition.
  13. scott_intx

    AlfaOBD

    Awesome. Is there one in each seat or one in the truck?
  14. scott_intx

    AlfaOBD

    Is there a single module or is there one in each seat? I found Heated Seat Module - Mopar (68217268AF). Do you know if it would just be a matter of swapping this? It appears to be the same for both heated and vented.
  15. scott_intx

    AlfaOBD

    I have a 2016 Bighorn that started life with the 8.4" RA4 and standard seats. I added a UAS from a 2019 Classic and recently added heated/ventilated seats from a 2014 Laramie. I added the options in Alfa for them, however it looks like there might be something else going on. My "Controls" screen...
Top