Recent content by SDDawg

  1. S

    Rockfored Fosgate DSR1

    Nice to hear your success Wilfong9. Sounds like an impressive setup. Have you tried the 1.4.1 software release? I'm still on 1.3.1. I was hoping for some adjustments to the sensors and other sounds. I also can verify the auxiliary (and Carplay in my case) sound the best by far. I swear the...
  2. S

    Rockfored Fosgate DSR1

    Has anyone else that's installed the DSR1 noticed how terrible the other functions sound? The audio on a phone call sounds absolutely terrible! Even sirius radio sounds worse. Music off the iPhone sounds incredibly clean, but other sources are bad. Any ideas?
  3. S

    Rockfored Fosgate DSR1

    The DSR1 does have a high level input. So you can take the regular high level full range output from the factory head unit and go into the DSR1. It would require splicing into the factory harness however.
  4. S

    Rockfored Fosgate DSR1

    Drivers side right above the parking brake. If you have the 6 speaker system then you don't have an amp. Only the Alpine system has it. You can still use the DSR1 though. You will just use the high level inputs on the DSR1. Good luck!
  5. S

    Rockfored Fosgate DSR1

    This might be a difference on the 2018 Ram. I'm not sure you need the resistors on the 2017 and older.
  6. S

    Rockfored Fosgate DSR1

    Plug and play at the amp. You unplug the amp and use the Maestro aR to interface the DSR1. The factory amp is no longer part of the system.
  7. S

    Rockfored Fosgate DSR1

    Its actually pretty good. You can download the app and get a feel for it on its own. Just go to the app store and search for "Rockford Fosgate Perfect Tune".
  8. S

    Rockfored Fosgate DSR1

    Here are the resistors I used. https://www.amazon.com/gp/product/B00CVZ43SW/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 They need to be put in parallel on the inputs to the DSR1. Here is a diagram I got from iiData. Also make sure you have the DSR1 on the latest software version.
  9. S

    Rockfored Fosgate DSR1

    So, I have everything working now. I probably have 3 full days into it. Allot of that was troubleshooting the DSR1. The DSR1 is pretty sweet. I have it feeding a Punch 1000X5. Installed Alpine R Type front and rear with the tweeters in the stock dash corner locations. I was worried the tweeters...
  10. S

    Rockfored Fosgate DSR1

    Yep its the Alpine.
  11. S

    Rockfored Fosgate DSR1

    One other thing for anyone tackling the DSR1. The status light blinking 6 times green and then going to solid white, then back to 6 green flashing is normal according to Rockford. Crutchfield said it should be solid white, i-Data said green flashing meant that it was connecting to the factory...
  12. S

    Rockfored Fosgate DSR1

    Update: I installed the DSR1 and the i-datalink Maestro aCH2 this past weekend. The wiring all matched up perfectly. I am having an issue with the DS1 though. No signal is coming out of the RCA's. I called Crutchfield over the weekend and they were unable to help since the unit is so new and...
  13. S

    Rockfored Fosgate DSR1

    I ordered the DSR1 and plan on installing it in the next week or so. I will let you know how it goes.
  14. S

    2018 Alpine system

    Will do.
  15. S

    2018 Alpine system

    Has anyone upgraded the Alpine system in the 2018 yet? I'm about to install the Rockford Fosgate DSR-1 and bypass the stock amp. I had to program it using the 2017 setting. Any input would be appreciated. Thanks!
See more

Latest posts

Members online

Total: 408 (members: 7, guests: 401)
Robots: 1,229

Forum statistics

Threads
195,624
Posts
2,872,662
Members
156,454
Latest member
Goodie1990

Share this page

Top