Recent content by sinnyz79

  1. sinnyz79

    Installed level kit and bigger tires now some issues

    I'll do the leaf springs myself but I had the level kit on the front, new struts, new control arm with ball joint and tires/rims installed by a local shop.
  2. sinnyz79

    Installed level kit and bigger tires now some issues

    Not sure why my post got moved, should be under lifted where I originally had it. ANYWAY, what do you think is the best rear suspension option for lifting the back end up? Blocks, new leaf springs, air bags, or air shocks. I want the best option to help with towing and also level it out. Thanks!
  3. sinnyz79

    Installed level kit and bigger tires now some issues

    What about air shocks to raise up the back end? I need new rear stocks anyway and this would help lift them and also help when I'm towing to keep the back from squatting. I know people say air shocks ride stiff but I've had several vehicles with them and always seemed to ride normal. We put them...
  4. sinnyz79

    Installed level kit and bigger tires now some issues

    So I put a 2.5" leveling kit on the front when I added the 35" tires and 20" rims. There are apparently different tire pressure sensors because I keep getting the light to come on and flash 3 times every time I'm driving then it stays on. I thought these were self learning and would go off? I...
  5. sinnyz79

    Leveling Kit for 35s Question

    Yeah thanks, super super pumped about getting them installed. It's totally going to change the look of the truck. I'll post pics when I get them put on.
  6. sinnyz79

    Leveling Kit for 35s Question

    So I found these tires and rims, 35" on 20" rims with only 3000 miles on Facebook marketplace for $1500 that were on a Dodge Ram. Pretty happy with how they look and going to get them on my truck next week. I'm going to buy a 2.5" leveling kit for the front. My question is, do I need to do...
  7. sinnyz79

    Wheel still pulling after 2 alginments and tires

    Gotcha, yeah I'll probably go with the good ones. I went cheap on the rotors and pads a couple years back on ebay and regretted it. The pads are cheap and squeak even after lubing up the back of them. Might change out the pads if I'm getting new calipers. Do I need to bleed them after doing this?
  8. sinnyz79

    Wheel still pulling after 2 alginments and tires

    Wow, that's interesting that you mentioned that because it does seem worse in the morning when it's been cold. Really doesn't seem as bad once I've been driving it but it's still there for sure. I was amazed after 2 alignments and new tires that the issue was still there. It truly sounds like it...
  9. sinnyz79

    Wheel still pulling after 2 alginments and tires

    Yeah, at this point I'm ready for a new shop because Firestone did it both times. I only paid the first time, the 2nd time they took care of it. 3rd time is the charm?
  10. sinnyz79

    Wheel still pulling after 2 alginments and tires

    My 2008 Ram has had some steering issues ever since replacing the lower control arms, ball joints and front right CV shaft. I got an alignment right after that but it was still off. So the shop I took it too told me it was the front tires, which they were worn bad from the messed up suspension...
  11. sinnyz79

    06-08 1500 4x4 Bilstein Install (no pics, just story and info)

    I actually just need the bolts since I'm replacing the control arms. Looks like a trip to the dodge dealer
  12. sinnyz79

    2007 4x4 front lower control arm bolts

    Where'd you order them from? Rock auto has one bolt and bushing but I need 2 bolts and already have the bushing. Please post the link.
  13. sinnyz79

    06-08 1500 4x4 Bilstein Install (no pics, just story and info)

    Hey where'd you get the replacement bolts for the lower control arms? I called RockAuto and they said they don't have the replacement bolts. I found someone on ebay selling single bolts for $34 each saying Dodge is the only provider of these bolts. I find that hard to believe. If you can point...
  14. sinnyz79

    06-08 1500 4x4 Bilstein Install (no pics, just story and info)

    Man thanks for providing links with all the parts, that's going to help me out a ton. So I went to a local ship today to have them actually check out what's going on up front. I told them I knew the front struts were bad cause they were leaking. Anyway, they checked it out and had a whole list...
Top