Recent content by skibender

  1. S

    Truck dies over 2000 RPM

    Replaced TPS - took for a short drive and seems to run much better. The o'ring was missing from the sensor also. Also did the 4x4 transfer case linkage fix. 2 things fixed today so it was a good day.
  2. S

    Truck dies over 2000 RPM

    P0121 - TPS. Today when I drove the truck, the idle was very erratic.
  3. S

    Truck dies over 2000 RPM

    Hi all, Recently bought 2003 4.7 Ram. Truck has been a lemon since purchase. Anyway, new problem - drove to hardware store 15 miles away and truck ran good. On the way home, anytime I accelerated above 2000 rpm, the engine just died. Happened 5 times on the way home. As soon as it died, I...
  4. S

    EVAP CEL - need some help

    The EVAP canister vent is the part I'm questioning. Could someone take a photo of this vent? Mine just seems to be capped off. I appreciate any assistance.
  5. S

    Truck shutters on take off

    Mine has a minor shudder while taking off and it's a problem with my rear ABS. I haven't had time to look at it but it threw a code.
  6. S

    EVAP CEL - need some help

    No one knows where this hose terminates in the engine bay? Or was my post confusing with the description or photo? I can take another photo or try to explain better if you all would think that would help. The photo I posted is under drivers side right in front of fuel tank. The hose goes to the...
  7. S

    EVAP CEL - need some help

    Just purchased a 2003 Dodge Ram 1500 with the 4.7l engine. Has a CEL for EVAP leak so I've been looking at info in the service manual. Crawled under the truck tonight to look at the Natural Vacuum Leak Detection Assembly (NVLDA) and noticed the following problems: 1)The wires for the plug are...
Top