Update: spent the weekend under the truck -18c. Came across a dated but very useful trouble shooting procedure for the C1464 and the C147B codes (attached). Was able to determine I had a short to voltage on the G303 circuit and lost continuity (intermittent) with short to voltage on the G304...
Maybe a bit off-topic....has anyone managed to get turn by turn to show up in the EVIC using a 2018 UAS on v22.6 with CarPlay?
I have enabled the setting in the BCM via AlphaOBD but it does not show up as a display option on the screen. Thinking the feature is reserved for UAQ units only??
I've been working at getting my 2016 upgraded to a 2018 UAS for CarPlay functionality for a few days now and would like to add the UAS seems to be finicky as to which multi media hub is used.
There have been posts here that suggest P/N 68397098AE will work and I can confirm through a member...
No, I did the power mod per thrashie using the same P/N hub.
The phone has power but no connectivity to the head.
Could this be a mission for AlphaOBD and the BCM?
thrashie, I did this hub swap hoping to get CarPlay on my 2018 into 2016 upgrade.
For some reason, the head will not acknowledge a USB connection. I have power at the hub, phone charges but no CarPlay and no USB connection.
Disconnected battery, rechecked the connections, no love.
Amy ideas?
Folks,
Found an RA3 17.43.01 version that worked on my Canadian MY16 8.4 UConnect stuck on 16.09.09. This should allow me to jump to 18.45.01 and activate the NAV/install the latest map package although I'm pretty sure I can do that on 17.43.01.
The file is here...
vacuum leak will cause a run away (high) idle. You say you tap on it and the rpm increases.
like I said guessing. You can test it with a squirt bottle of water. Couple of squirts around the base and it should settle down.
If not, then it's something else.
Hi there all,
Posting this in hopes someone has an RA3/RA4 v17.xx.xx MY16 Canadian update file squirrelled away.
Many thanks for taking a look.
Cheers,
Donald,
Did you complete this installation? Were you able to get things working correctly after switching to projectors?
I have almost the same setup but am using Morimoto projectors. Having a hard time with bulb out errors and no high beam signal for the shutters from the truck side.
Alfa...
Hey RusslRam
I have the Morimoto HID projector setup on a full retro replacing my stock quads.
Did you use AlfaOBD to tame the lamp out error codes? If so, what settings did you use?
Appreciate the info
sky
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.