Recent content by stateofdade

  1. stateofdade

    Siphon transmission fluid

    I screwed up and put too much fluid in after changing out the filters, etc... Now I'm getting the P0871 code and I need to pull some out. Heard that you can siphon some off, but what would you use for that?
  2. stateofdade

    35X12.50R20 vs 285/60R20

    Thanks for the informative replies.
  3. stateofdade

    35X12.50R20 vs 285/60R20

    Not finding any information about this so I'll ask. As the title says, I'm wanting to discover if the 35X12.50R20 will fit a wheel that easily accommodates my current 285/60R20's. Clearance isn't an issue on my 2500. Just want to make sure the tires can be mounted before dropping cash on them...
  4. stateofdade

    Vin questions

    That's what I pulled up, but the drive train looks like a 2500 so we were uncertain exactly what to order.
  5. stateofdade

    Vin questions

    So a friend's 2007 RAM with the VIN 3d7ks19d77g831666 says it's a 1500 but it's quite obviously a 2500 mega cab. The rearend has a 10.5 and the front is a 9.25. Does this sound correct? We're trying to find more information about the truck so that we can re-gear to 4.10 but I want to make...
  6. stateofdade

    Steering stabilizer

    Truck has a 2.5 inch level. It's perfectly aligned and balanced. My only irritation is when I get over 60mph, I notice some vibration in the steering. Nothing crazy, but I'm needing to check the steering stabilizer for sure. I'm about to add the steering box bracket to stiffen things up as...
  7. stateofdade

    Skyjacker BlackMax shocks

    I can't find any information in regard to whether or not these shocks are adjustable. I'm sitting just a tad lower on the rear passenger side and looking for options to correct what annoys only me.
  8. stateofdade

    Looking for advice

    Warranty is already expired. I purchased an aftermarket warranty from the seller and they don't hold the delete against me. I'm good on that account. What I'm looking for is a way to determine which tune was used on my truck.
  9. stateofdade

    Looking for advice

    I pulled the trigger and upgraded from my 18 1500 Bighorn to a 2016 2500 Lonestar with the Cummins. Got the truck with only 61k on the odometer and it was deleted already with the four selection switch, a lift, and aftermarket rims. Got it with an all encompassing warranty that doesn't care...
  10. stateofdade

    Made a boo-boo buying a 6.7 Ram?

    The issue with 5'ers is that they have pin weight rather than a tongue weight. There's more weight on that pin than a TT or other trailer will likely hope to have. Most decent 5th wheels are between 1500 and 1900 lbs in the bed of the truck so keep this in mind when making plans.
  11. stateofdade

    Sway bar end links

    Is the RWD 1500 equipped with these end links? Having trouble finding information on this. I have just replaced my rear end link with a Moog. The dealership is trying to claim that the looseness in my drivetrain is from the front end links so I'm replacing all of them in an attempt to prove...
  12. stateofdade

    Pulsar

    From what I've learned from reading, it's more than throttle response and includes mds disabling and advanced timing and spark adjustments which can give about 20 to 25 extra horses and torque depending on fuel type and environmental factors.
  13. stateofdade

    Catch can

    So you just mounted that on your CAI? Did you use any particular mounting hardware?
  14. stateofdade

    Pulsar

    I have swapped out the 3.21 with a 4.10. Is this something I'll have to adjust when it's installed?
  15. stateofdade

    Pulsar

    Considering getting a Pulsar because I really don't want the hassle of doing a full tune since I'm only keeping this 18 another year or so before moving up into an HD. Does anyone have first hand knowledge of the axle settings to change it to read a 4.10 properly?
Top