-
-
Ttokillamurderer reacted to Ramm5.7's post in the thread Suggestions for a good quality sunshade. with
Like.
This is a good one -
Ttokillamurderer replied to the thread Help with new to me 2019 lifted Ram 1500 Classic.Thanks for the replies guys. A couple of you recommended the Ready Lift 4" lift. Why that one in particular, and why 4" instead of 3"...
-
Ttokillamurderer reacted to j-b's post in the thread Help with new to me 2019 lifted Ram 1500 Classic with Like.
Based on the stance, CV angles, and Upper Control arms I assumed you had this kit 3" Rough Country Lift But it appears this kit does...
-
Ttokillamurderer replied to the thread Help with new to me 2019 lifted Ram 1500 Classic.Oh no shit, I didn't even notice the RC. Thank you for pointing that out! Do you happen to know if those are any good? The reason I...
-
Ttokillamurderer reacted to Atcer2018's post in the thread Help with new to me 2019 lifted Ram 1500 Classic with Like.
If you look at your pic 080634 it shows a RC on the ball joint cap. RC is the logo for Rough Country. OEM UCAs are stamped steel and...
-
Ttokillamurderer replied to the thread Help with new to me 2019 lifted Ram 1500 Classic.Also, you say I probably have very little down travel left. Can you explain? Is this because of the shocks or the control arms? I would...
-
Ttokillamurderer replied to the thread Help with new to me 2019 lifted Ram 1500 Classic.How can you tell I have aftermarket front upper control arms? Is that good or bad? I have 35x12.50 tires. Just ordered a new set of...
-
Ttokillamurderer reacted to ram1500rsm's post in the thread Help with new to me 2019 lifted Ram 1500 Classic with Like.
Pitman arm drop in a 1500 IFS truck? and that wouldn't be a good idea with a live axel either. that's a cheap fix that doesn't work if...
-
Ttokillamurderer replied to the thread Help with new to me 2019 lifted Ram 1500 Classic.Thanks for the reply! What would tell me if I need control arms? What do I go about checking?
-
Ttokillamurderer replied to the thread Help with new to me 2019 lifted Ram 1500 Classic.Thanks for the info! And I guess I haven't looked under my truck with enough detail to know about the pitman arm. Woops. Is the only...
-
Ttokillamurderer reacted to CheechDogg.0n37s's post in the thread Help with new to me 2019 lifted Ram 1500 Classic with Like.
Bump steer is what you are experiencing when you go over the bumps, caster and camber if not set right can make your truck do that, you...
-
Ttokillamurderer reacted to j-b's post in the thread Help with new to me 2019 lifted Ram 1500 Classic with Like.
A couple of things I noticed. Your CV angles are very extreme. They should be almost flat, or have a slight bend to them. This is most...
-
Ttokillamurderer replied to the thread Help with new to me 2019 lifted Ram 1500 Classic.Update. I dropped the truck off at the dealer I bought it from for the wobble. They said the tires are scalloped, and that they don't...
-
TI run 35"x12.5" R20 Nitto Ridge Grappler's at 36 psi and my ride is pretty smooth. What tire pressure you running at?
-
Ttokillamurderer reacted to muddy12's post in the thread I contacted Toyo Tires for proper PSI with Like.
I’ve always “chalk tested” larger tires. It lets you dial in the psi to your specific setup. Sent from my iPhone using Tapatalk
-
-
Loading…
-
Loading…
Staff online
-
rule18Admin
Members online
- Underground Lighting
- fulbuyer
- La Ramie
- FL-RAM
- Palm9678
- avantiguy
- quickster2
- Rlaf75
- SniperDroid
- dustminer
- Nmenagh
- rule18
- stevenP
- rpmpest
- 04hemiram
- TRCM
- mb33458
- David H
- Jeth
- john.hamelin.9
- 14 Lonestar
- JayLeonard
- Ole Buck
- Quick_Shifter
- Hemi832
- rick16706
- OliverJah
- duckman631
- SteveRR
- larrygaither
- jrollf
- Franks
- 2500cummins
- NCPowerwagon
- NickM757
- jawzs2
- Huffdaddy1
- JA Ramy
- Dan Jacopino
- Grim