I knew this part numbers a while ago but forgot them. Randomly found an old post about them so if anyone needs part numbers in future it’s bilstein 2202G for the bushings and bilstein e4-r01-z008C58 for the sleeves you need 4 of each for the shocks.
Hello does anyone know the part number for the shock bushings and sleeves for this bilstein 5125 shock part number 33-185569? They came on the mopar 2” lift kit and you had to change out the bushings and sleeves. This kit was for any 4th gen Ram 1500.
I did shake exhaust I forgot to mention it but I do have a broken manifold bolt...only one that I can see I have to make an appointment with the dealer for that. I did take a praybar and start praying on all the bushings and found no movement on anything that was abnormal. I jacked the front end...
Hello I have a 2017 Ram 1500 with a 4” superlift along with bilstein 6112. I am getting a rattle from what sounds like the front end and it only happens when I hit bumps on the passenger side. Going down the road hitting multiple potholes it clunks followed by a rattle. Almost sounds like a...
i have the brake line/sway bar extension bracket extension, the superlift springs, bumpstop extensions and I also have extended front sway bar links for the front I can do $150 if anyone is interested it’s used but in good condition. I took off my truck to install 4” kit. You would just need the...
what brand lift do you have? I have the same problem I feel it in the steering wheel as well. I have the superlift 4” kit and the diff is awfully close to the skid plate
You have a 6” superlift? I have a 4” superlift and my bilsteins are at .7” as well. The 6” bumps them to 2.8”. My cv axle is also completely flat with them set to .7” Does your cv axles bind at full droop?
so far the coils from this 4" kit are way beefier than the superlift ones i've had on before. No luck with the knocking. Kinda just gonna try and ignore it i have no idea what it is the whole front suspension is tight.
Just to clarify when I said I’m living with it I returned the rough country knuckles and just put the superlift knuckles back on. If I do get into that situation I feel it would be a lot less of a problem with it hitting the spring than putting some serious power down to an axle that is binding.
No but rough country does sell a different style knuckle for their 6” lift that does clear the spring but my cv axle was binding bad with that knuckle. I ended up just living with it. It’s probably not going to see that issue 99% of the time so I’m not worried about it. It’s probably due to the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.