-
-
Pull your valve covers and check movement amount on rockers if one isn’t moving as much as others that would point to cam lobe failure. -
tscarber replied to the thread Camshaft kit help.Learn my lesson on this one. Texas Speed kit is great but had bug after bug and got an amateur tuner to do it and still have some slight...
-
Hp tuners and Flyin' Ryan. Don't buy a cam kits from places that dont do custom tunes.
-
Are you planning on boosting it,or hitting it with a 200 shot of nitrous,then it's beneficial to open up the stock ring gaps,if not then...
-
tscarber replied to the thread Piston rings.I just completed a full rebuild, MDS delete, All of the "hellcat" upgrades, 110k miles and piston rings looked perfect. I personally...
-
tscarber replied to the thread P000B Tuning or Bust?.Any update or info on this? I am having P000B on rare occasions. Just tuned and MDS deleted. Tuner did state he deleted VVT out of the...
-
Does it just 'die' ..or does it stumble a bit first? I guess I would probably defer back to the speed shop if they recently did the work...
-
tscarber replied to the thread Truck Dies while coasting.After some time working on the truck. I have now got it tuned and worked out some electrical bugs having to do with a dead cell in the...
-
tscarber replied to the thread No Codes, No Start.After some time working on the truck. I have now got it tuned and worked out some electrical bugs having to do with a dead cell in the...
-
tscarber replied to the thread Truck Dies while coasting.The truck idles and drives perfect up until at random stops it dies with no warning. I have done all of the work myself besides the...
-
tscarber replied to the thread Truck Dies while coasting.Starts right back up with no issue and drives. Only dies every 3rd or 4th stop
-
I have a 2013 Ram 1500 5.7, After a full motor rebuild the truck is now dying when coasting. No codes, No warnings. I took the truck to...
-
tscarber reacted to audiophile's post in the thread New Tires Do I Need New TPMS systems? with
Like.
They should replace the service packs. The sensors themselves should be fine. -
I just realized i responded to the wrong thread before yours is a hemi have you checked compression? Could very well be a tune issue I...
-
tscarber replied to the thread No Codes, No Start.The cam i bought is a stock one from Texas-Speed & Performance
-
-
Loading…
-
Loading…
Members online
- SniperDroid
- DOlds
- Tony81089
- PolarisCobra
- NosterCoaster
- Mike Flea
- Andy606Andy
- Mr_Ames
- RamDiver
- 2014 Longhorn
- Farmer Fran
- Wild one
- Daniel Ortiz
- Travis8352
- stvbldso
- frank1823
- FJ Mike
- John Mancino
- dieselscout80
- Ggrimes356
- Ole Buck
- shmedley
- MJE1
- Jeepwalker
- Abrams117
- Dredger
- yohan1234
- DynaBro
- WildcatJoe
- olyelr
- Sdpadrez
- Zoe Saldana
- odinjunior
- Baja1
- Nigel Hoffman
- Stangboy101
- Jlexbak
- MoparMan_21
- Ramrt345
- 18CrewDually
- Kendig83
- BeardyMcBeardface
- Rodp84
- Prbiggs
- Dean2
- jawzs2
- andrea64
- Jwrigh12
- KPMH
- Rambolt