Yeah bone stock and no codes, I’ll check that out and see what I can find thank you I can’t really find any good data of the numbers I should be looking for on the MAF in LB/M
I had originally thought along those lines, but I use the hot shots additive every fill up and have been through 6-7 tanks of fuel and it’s still acting the same unfortunately. I’m using a Wix filter, which I used everytime I’ve changed the filter with success, has me stumped
Currently driving across country and my Ram 2500 6.7 is feeling really sluggish, very little power when I put the pedal down but still getting good fuel economy. Just changed the oil / air filter / fuel filters a few weeks ago. Currently getting around 1.7 LB/M at idle and around 10 LB/M...
Looking to see if anyone has any insight into maintaining the correct transmission fluid level after installing a thermal bypass valve. With it installed the transmission never gets close to the 180 degree mark to have an accurate measure of the fluid when hot. It generally runs 140-145 max...
Just finished my fog light install, thanks again to @Mpgrimm2 ! I did the install on a 2018 Ram 2500 Cummins and thought I’d add some photos of how I routed the wires around the inner cooler / bumper / frame. Also included photos from Alfaodb of how to enable the fog lights and how to turn off...
Just finished the ATC conversion on my 2018 Ram 2500 6.7 Cummins. Thanks to @Mpgrimm2 / M2 Mods for all the help with it. Solved all of my issues that came with upgrading to the 8.4 UAS. Found that either disconnecting the negative battery terminals or letting the truck sit over night in between...
Update: Just did the ATC conversion with the help of @Mpgrimm2 / M2 Mods and it solved all the problems, I highly recommend it! http://www.ramforum.com/index.php?posts/1458159
For sale, 4 inner door panels from my 2018 Ram 2500 crew cab in black. In great condition, pulled out of the truck with less than 1,000 miles on it. Comes with window switches on all 4, both front door upper column trim pieces, and 4 trim pieces next to door handles. Asking $150 OBO if picked up...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.