Recent content by UnkoBro

  1. UnkoBro

    Decided to try some LEDs...

    I have a 2014 Ram 1500; I have DRL activated on my BCM for my fogs; I have the LED bars wired direct to a "switched" fuse location in the fuse box under the hood. I also have "Disable Low Beam Dropout with High Beams ON" in the BCM (through Alfa OBD) which gives me all 6 lights on when needed...
  2. UnkoBro

    M² Mods Intro & Project List

    Happy Anniversary, brutha!!!
  3. UnkoBro

    Carbon Fiber Flat Bottom Steering Wheel

    I love my wheel!
  4. UnkoBro

    ABS Control Module HELP PLEASE!

    The install itself was easy; 4 hex bolts. The AlfaOBD steps were easy, too; I had John Lance (from the AlfaOBD Group on FB) walk me through it, step-by-step. I will attach screenshots of our convo (because for the life of me, I can't verbalize it well enough to instruct the process) but it...
  5. UnkoBro

    RA-2 Radio with backup camera

    Also try going to this site: www.vindecoderz.com and enter your Ram vin#...you can get your full Build Sheet and specs for your specific Ram
  6. UnkoBro

    RA-2 Radio with backup camera

    It's crazy how the dealership so often denies the abilities of mods and upgrades to 4th gen Rams...the incompetence is ridiculous. I bought a 2014 Ram new off the lot, that came with an RA2; originally they wanted to charge me $970 to add the tailgate handle rearview cam. I installed an...
  7. UnkoBro

    Visor Vanity Wiring

    Does anyone know the best location to tap into for getting power for the Visor Vanity Mirror Lights? I have a 2014 Ram 1500 Express with overhead console, and after taking the headliner down, I do not see an existing harness with plugs to connect the visors to. Are there wires in the A-Pillars...
  8. UnkoBro

    2015 RAM 2500 REAR VIEW CAMERA ISSUES

    @Mpgrimm2 with my 2018 UAQ (that you assisted me with install :) ) I want to install the OEM CHMSL Cargo Cam; I already have an aftermarket back-up cam (pinned into 31 & 32 and working) and enabled CHMSL Cam in AlfaOBD (which enabled the Cargo Cam button on-screen) to allow me to access the...
  9. UnkoBro

    Ram UConnect

    Going from a 5.0 Uconnect with manual a/c controls to an 8.4 Uconnect (which has touchscreen climate controls) will take alot more than just a headunit and plugNplay. @Mpgrimm2 on this Forum is the master at guiding folks with this conversion. In addition, you will require "flashing" your BCM...
  10. UnkoBro

    8.4 Ram uconnect

    Going from a 5.0 Uconnect with manual a/c controls to an 8.4 Uconnect (which has touchscreen climate controls) will take alot more than just a headunit and plugNplay. @Mpgrimm2 on this Forum is the master at guiding folks with this conversion. In addition, you will require "flashing" your BCM...
  11. UnkoBro

    Decided to try some LEDs...

    Also posted a short video showing the headlight start-up "animation" using Start X (remote start) with the headlight switch set on "Auto". You also get the same "animation" (minus the first 3 "flashes" from using Start X remote start) when starting manually, with the headlight switch set to...
  12. UnkoBro

    Decided to try some LEDs...

    YES...both the Auxito LED's (high beams) and Light Moses 360° LED's (low beams) fit inside without any modification to the covers. I index'ed the Auxito's at "9" and "3" and the Light Moses LED's are a 360° chipset that doesn't need to be indexed. When you're close enough to a flat surface, you...
  13. UnkoBro

    Decided to try some LEDs...

    OEM Quad Halogens originally...and these drop right in, BUT take H7 bulbs in the projectors
  14. UnkoBro

    Decided to try some LEDs...

    Alpharex Pro G2 Projectors First shot is low beams only (no fogs) With Light Moses Premium 360° LED's Second shot is high beams only (no fogs) Auxito H7 LED's
  15. UnkoBro

    Decided to try some LEDs...

    I will get some night shots done tonight and post them :)
Top