Recent content by whipplenight

  1. whipplenight

    PVC/CATCH CAN DELETE

    Mighty Mouse it is.
  2. whipplenight

    PVC/CATCH CAN DELETE

    Emptying out a can isn’t the issue, it’s the speed in which the can fills that is concerning.
  3. whipplenight

    PVC/CATCH CAN DELETE

    Anyone running forced induction or similar and have deleted the PCV and catch can from the equation? I’m debating on deleting the PCV from the whipple and will not longer use a catch can. What ya think? reason for this is my catch can is filling up extremely fast and if I don’t dump it in time...
  4. whipplenight

    Whipple PCV/venting

    Yeah, I’ve heard multiple people say they’ve had misfire thresholds modified in the tune. The misfire issue didn’t start until the whipple decided sucking oil was a fun hobby. But I wouldn’t disregard the air flow design as I’ve seen misfire from a handful of people with no primary cause. I’ve...
  5. whipplenight

    Whipple PCV/venting

    This is happening at idle in park. It just doesn’t make sense if the system is intended to be under vacuum then why did whipple run the vent hose to the air box? Also if the system is always sucking the check valve tight causing a seal how is it supposed to relive crank case pressure?
  6. whipplenight

    Whipple PCV/venting

    Hello, long story short I was getting a cylinder 8 misfire I went to swap coils and plugs and I found the problem staring at me. The whipple had a puddle of oil sitting behind the throttle body! The catch was filling up very quickly and putting oil back into the intake. So I decided to run a...
  7. whipplenight

    PCV System Whipple

    Not really the route I’m seeking.
  8. whipplenight

    PCV System Whipple

    For those of you with whipples on your rams what are you running to combat blow by into the whipple. I had a catch can and a small filter on the whipple intake below the oil cap, but the catch can was filling up extremely fast causing oil to puddle up into the intake. I have since added a Metco...
  9. whipplenight

    FALSE KNOCK

    All the smart hemi guys are in Texas ‍♂️
  10. whipplenight

    FALSE KNOCK

    Bump for Orlando area guys
  11. whipplenight

    FALSE KNOCK

    Flex plates good anyone in Orlando want to take a look?
  12. whipplenight

    FALSE KNOCK

    I pulled the inspection cover but it’s really tight to see all bolts on the plate.
  13. whipplenight

    FALSE KNOCK

    The false knock is happening at higher level shift points.
  14. whipplenight

    FALSE KNOCK

    Replaced knock sensors no fix
  15. whipplenight

    FALSE KNOCK

    Easy way to inspect that?
See more

Latest posts

Members online

... and 8 more.
Total: 1,269 (members: 58, guests: 1,211)
Robots: 1,488

Forum statistics

Threads
195,446
Posts
2,870,380
Members
156,155
Latest member
philllyc

Share this page

Top