Recent content by whitezracer

  1. W

    Programming New Key Help Please, KEY NOT IN LOCK STATE

    My brother has a 2014 Ram 1500 Express and he lost the only ignition Fobik he had to it and I have tried to program a new fobik to it with no luck. I have a Launch scan tool and I have tried the software with it and the alfa obd software and both have the same issue. When I try to program the...
  2. W

    How To: 13-14 premium cluster upgrade

    I found a premium cluster for my 2014 Ram 1500 express Hemi 8 speed but the cluster is coming out of a 2013 Ram 1500 v6 6 speed, will everything still function as it should even though it’s coming out of a v6 6 speed and going into a hemi 8 speed?
  3. W

    How To: Add Factory Keyless Enter N Go

    So maybe that's not my issue then.
  4. W

    How To: Add Factory Keyless Enter N Go

    Ok, I think I have figured out what is causing mine to throw those codes for the door handles. When it does work, on the driver side door handle when I get my finger close to the door handle anywhere it unlocks the doors instead of just when I put my hand inside the handle like it should so do I...
  5. W

    AlfaOBD Support For 06~12 Rams

    I am also curious about the digital speedometer and also completely disabling the TPMS system so the annoying warning does not come across the screen every time the truck is started.
  6. W

    How To: Add Factory Keyless Enter N Go

    What is strange to me is when one handle doesn’t work both don’t work and when one works both work, that leads me to believe it’s nothing to do with the wiring since both start and stop working at the same exact time. If one was working and the other wasn’t then I would defiantly say it’s a...
  7. W

    How To: Add Factory Keyless Enter N Go

    I tried unhooking the battery and still the same thing, here are the 2 codes that keep showing up. I can clear them and they will come back and like I said the passive entry will work one minute and won’t work the next, everything else still seems to work fine.
  8. W

    How To: Add Factory Keyless Enter N Go

    Ok, that was my issue, I got the new hub and key programmed and done the hub reset and it fired right up and ran perfect. Well I shut it off and tried the passive entry and nothing on either door. I then drove it up the road about 2 miles to see if it would read the tire sensors and it picked...
  9. W

    How To: Add Factory Keyless Enter N Go

    True, lol.
  10. W

    How To: Add Factory Keyless Enter N Go

    Ok just wanted to check before ordering anything else. Yes, I will probably get someone to unlock this key I have and I will probably order a new one along with the rf-hub and then I will have 2 fobs for it. Thanks for all the help and I hope this is my final issue with all of this.
  11. W

    How To: Add Factory Keyless Enter N Go

    Ok, let me ask this question. I think I read that hub part number 68319680AD will work on the 2014 no problem but I can't seem to find where I read that, I want to be sure it will work before I order a new one. Like I said I just want to get it working and get it over with now, tired of messing...
  12. W

    How To: Add Factory Keyless Enter N Go

    No I did not hear it unlock or attempt to unlock. So are you saying there is no way to use a used rf-hub on another truck because that may be what my issue is because I bought a used rf-hub from a wrecked truck, if so I probably need to purchase a brand new hub and everything will probably...
  13. W

    How To: Add Factory Keyless Enter N Go

    The part number on the rf-hub is 56046941AH which is the part number that shows to be the correct part number for a 2014 Laramie with keyless go and remote start and my truck is a 2014 Big Horn with remote start. Yes I ran the wiring just like in the beginning of this thread and I also tested...
  14. W

    How To: Add Factory Keyless Enter N Go

    I have the fob that goes to the keyless go system not the baseline one.
  15. W

    How To: Add Factory Keyless Enter N Go

    I checked that and it all looks fine. That is something else I just noticed is that the keyless entry will not function either so maybe it is something with the fob. I don't know what to do about that because I don't want to buy a new fob and program it to that rf hub and then there be something...
See more

Latest posts

Staff online

Members online

... and 9 more.
Total: 1,304 (members: 59, guests: 1,245)
Robots: 1,578

Forum statistics

Threads
195,476
Posts
2,870,725
Members
156,191
Latest member
chuckitt20

Share this page

Top