Y
yellowblack
- Posts
- 7
- Reaction score
- 6
Latest activity Postings About
-
-
Yyellowblack replied to the thread Wheel Well Liner Rubbing - Stock.Update: the dealership was able to replace the “shield” or liner as its under warranty. Hoping it doesn’t happen again but not sure how...
-
-
Ysee the difference, bottom image shows a Highway Tire
-
Y"Another thing that you could do, might be dangerous to your health You could use a Hair Dryer, just don't get caught" I am presuming...
-
YHad that same rubbing noise its a software issue there was a recall on it
-
YI don't know if you have the air suspension or not - but you may have the same problem I did (with or without the air suspension). On...
-
YIf its under warranty, let them mess with it for a while, should be easy to see where its rubbing. A good heat gun fixes plastic...
-
Yyellowblack replied to the thread Wheel Well Liner Rubbing - Stock.I dont have the air suspension but I think this might be close to what I have, my driveway is on a bit of a steeper slope so when...
-
Yyellowblack replied to the thread Wheel Well Liner Rubbing - Stock.This is what the setup on mine is like (note:this is from the dealer’s site so not my actual truck, but same setup). These are how the...
-
-
Yyellowblack replied to the thread Wheel Well Liner Rubbing - Stock.Update: I spoke with the dealership and they ordered another liner to replace this one. It’s under warranty and I purchased the extended...
-
YIn the images, it looks like you have rubbed the Inner Fenders a bit. May i suggest that if you own a Heat Gun, heat up the plastic of...
-
Yyellowblack reacted to CanuckRam1313's post in the thread Wheel Well Liner Rubbing - Stock with
Like.
For a stock set up, they shouldn't be rubbing. Definitely go to the dealership and ask them to investigate thoroughly. -
Yyellowblack replied to the thread Wheel Well Liner Rubbing - Stock.Thank you - I will definitely try this, I’m going to bring it back to the dealership for another look since it’s still under warranty...
-
YEasy fix, cut 2 slits in the front of the liner about an inch apart, put a ziptie through that and to the body mount located about 6...
-
YThis is a solution^^^^. or you could use a heat gun to soften then manipulate it to gain more clearance .
-
Yyellowblack replied to the thread Wheel Well Liner Rubbing - Stock.Yes they are the stock tires that came with the truck when purchased new a few months ago, they’re the Goodyear Wranglers. I do a mix of...
-
-
Loading…
-
Loading…
Staff online
-
G-Ride990Administrator
Members online
- WSix
- DILLIGAF
- wasa3
- DEON2212
- bm02tj
- imamess
- Kid's HEMI! !!
- Justthebutler
- RamInfo
- bradpc987
- eldoradojim
- RAM DRVR
- averageguy
- TC
- dhay13
- duckman631
- David Vandercook
- mrack
- NCwagon
- U&A
- Black1500Ram
- AJC1776
- Rambo444
- Mb7640
- MSIGF63_91
- Airmousam
- yakalong
- skates15
- Docwagon1776
- Srt mel
- Wyo72
- G-Ride990
- paul30415
- Wild one
- jl1968
- Dan Topp
- Marshall
- Rav3ncroft
- Slinge
- 09SilverRam
- Bigdaddyii
- jabartram
- Rob2gen
- LOWRMPG
- Ken226
- Typhoon
- jrogowski83
- goofygrape426
- 13RAM13
- Travis8352