Two years ago I upgraded my 2014 RAM 1500 to the 7" premium cluster out of a 2018 RAM 2500. At random, about 8 or 9 times out of ten it started up on the "Vehicle Settings" screen (usually set to TPMS) instead of "Speedometer" (where I always leave it). Here's the interesting thing. Two...
Wow, the rear marker going out when the brake is applied is a HUGE hint. It reminds me of a similar problem a friend of mine had back in the 70's. Whenever he applied the brakes on his car one of the rear tail lights would go out. It took him forever to figure out what was going on but as I...
I agree that even if the computer is set for LED's it doesn't seem you should have the error. I'm sure it's very frustrating. For some reason the computer must be measuring too much resistance on one of your bulbs thereby thinking it's burned out. As a last ditch effort you might try...
I ordered a couple of 8 ohm/50 watt resistors because I was concerned about them getting too hot with a lower wattage resistor. If you're still using stock incandescent bulbs I don't why you are getting the error. To correct the error when using LED bulbs the resistor is wired in parallel with...
I have a 2014 RAM Hemi with 6 speed auto. I've set it up so it defaults to Tow/Haul every time I start it because it drives and shifts so much better. Most of my driving is around town and if I'm not in Tow/Haul mode the transmission drives me nuts always hunting for another gear and shifting...
I did this fix using (new thicker gasket) about a year ago and it worked great. Can't imagine anyone thinking silicone is a good idea when it comes time to replace a bulb.
A couple months ago I upgraded the 3.5" cluster in my recently acquired 2014 Ram 1500. I bought a Premium 7" cluster on Ebay from the "Instrument Cluster Store". Very happy with their service and the quality of the panel. Prices range all over the place, but unless you are really lucky, it's...
I was having the same problem and ran across your post. Parking Light Out fault whenever I braked or used the turn signal, but only when the lights were on. I also tried every setting imaginable with alphaobd. So I finally added an 8 ohm/50 watt resistor in parallel to the parking light...
I'm having the exact same problem on my 2014 ram. Did you ever get the "Parking Light Out" to go away? I've read a lot of threads, but none that have a good solution.
I have the exact same headers and setup on my 2014 5.7 hemi 6-speed. Installed the MagnaFlow 6 months ago. Amazon link is https://www.amazon.com/gp/product/B07M79ZD68/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1. Looks like the price has gone up, but it was very easy to install. Has...
Here are a couple screenshots showing the equipment listing from the website https://fcacommunity.force.com/RAM/s/equipment-listing
I also have a 2014 Ram and my listing is six pages long. Locking lug nuts are listed in the Options section and don't show up until the last page. I just tried...
I had similar issues with my 2014 Express with 5.7 Hemi 6-speed until I change the Tow/Haul so it defaults to Tow/Haul mode (think Sport mode). The shift points are so much better. Drives like a "normal" truck now. Don't notice any difference in fuel economy.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.