Recent content by zrojas

  1. Z

    Alarm when starting truck

    Does it honk twice when the parking lamps flash before the remote start? That's normal. If you go to the settings on the Uconnect radio you can turn the honking off. Once you do that, the lights will flash, but it won't make a sound. Sent from my SM-G988U1 using Tapatalk
  2. Z

    Numbers don't make sense

    Also your pictures show 11,400 as GVWR. That's for the Hemi. A SRW 3500 with 8' bed is 12,300lbs, and the Dually you are looking for has GVWR of 14,000. Thats why it doesn't make sense. As others said your curb weight is going to be in the 8500-9000lb range. With GVWR of 14,000lbs, that puts...
  3. Z

    rear lift block

    I added this from ready lift with no issues other than the U-bolts were really long. https://www.readylift.com/1-rear-block-kit-dodge-ram-2500-3500-1.html 2019 Ram 3500 HO with factory rear air. Sent from my SM-G975U using Tapatalk
  4. Z

    19' 3500 w/rear air

    You won't be able to lower it any more without changing your leaf springs or putting a load in the bed. It sits at it lowest unloaded rear height from the factory. Try pushing the bed lowering button without a load and you will see that it doesn't lower much, if at all. Mine bed height doesn't...
  5. Z

    Aftermarket items have problems with factory air suspension

    All 3500s with factory rear air have leaf springs. Sent from my SM-G975U using Tapatalk
  6. Z

    Aftermarket items have problems with factory air suspension

    The 1.75 Thuren coils on my 3500 with factory air rear suspension it the truck pretty much level. I thought it looked slightly higher in the front so I got the 1" block for the back. If I had got the 2.5" springs from Thuren I would have got a 2" block for the back. I think if you have leaf...
  7. Z

    Aftermarket items have problems with factory air suspension

    I replaced my front coils with 1.75" Thuren's. I had no issue. Then I added a 1" rear Ready Lift block for the rear, still no issue. The level sensor for the rear air suspension is measuring the angle from the top of the leaf pack to the frame. Adding a block under the leaf pack does not make...
  8. Z

    How effective is your air con on new 2500's?

    I didn't think so. Thanks. Sent from my SM-G975U using Tapatalk
  9. Z

    How effective is your air con on new 2500's?

    Do the 2020 HDs actually have R-1234yf? The 1500s do, but my 2019 3500 has R-134a. Sent from my SM-G975U using Tapatalk
  10. Z

    Sun Shade for 2019 2500 Laramie Mega Cab

    Weathertech.com Covercraft.com Heatshieldstore.com Sent from my SM-G975U using Tapatalk
  11. Z

    First heavier tow with the 19 2500

    I was in Raleigh at an Eaton plant inspecting some UPSs and then had to drive to Sumter, SC to inspect some Eaton switchboards and hit a crazy rain storm on the way. Couldn't see past the hood of the rental Ram 1500, everyone was driving 15 on the freeway. Glad you had a safe trip and a good...
  12. Z

    Towing Specs for Different Trims

    Try this site: https://www.ramtrucks.com/towing-guide.html Toward the bottom, select look up my vehicle. If you have your VIN already, you can put that in. If not, you can look up by year and options. The result shows you max payload and max towing, so you can infer GCVWR. Keep in mind that...
  13. Z

    Draglink clamp bolt

    Anytime, I can look up any of the service procedures for you as well if you need them. Sned me a PM. Sent from my SM-G975U using Tapatalk
  14. Z

    Draglink clamp bolt

    I would replace the clamp as well to ensure you have the proper torque and clamping force. The clamp is likely fatigued as well. Sent from my SM-G975U using Tapatalk
  15. Z

    Draglink clamp bolt

    I would think that the bolt should not be bent. If that was "normal", I'd expect it would be a bolt that would need replaced every time which doesn't make sense for an adjustment point. Someone probably got over zealous with an impact if I had to guess. Sent from my SM-G975U using Tapatalk
See more

Latest posts

Members online

Total: 993 (members: 41, guests: 952)
Robots: 1,576

Forum statistics

Threads
195,467
Posts
2,870,582
Members
156,176
Latest member
biggin91

Share this page

Top