Howells
Senior Member
I have a clarion Hu and the Metra 70-1818 wiring harness. Didn't get any instructions with the harness does anyone know what wires go where. Thanks.
installing aftermarket hu with infinity
- Thread starter Howells
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
headhunter123
Member
- Joined
- Feb 21, 2015
- Posts
- 99
- Reaction score
- 16
- Ram Year
- 1997
- Engine
- 5.9 V8
It should show on the wires. If not, check behind the labeling.
rammy98
Junior Member
- Joined
- Mar 19, 2016
- Posts
- 23
- Reaction score
- 1
- Ram Year
- 1998
- Engine
- 5.9 magnum
White - are left front
Grey - are right front
Green - are left rear
Purple - are right rear
(Black lines are negatives)
Your application has rca jacks so just plugg them in to your front and rear pre outs on the back of ur stereo. White & grey on fronts. And green & purple on rears. If ur adding sub(s) then u put that rca to ur sub output.
Red - ignition/acc 12 volts
Yellow - constant 12 volts
Black - ground
Blue- amp turn on
Orange - illumination
Grey - are right front
Green - are left rear
Purple - are right rear
(Black lines are negatives)
Your application has rca jacks so just plugg them in to your front and rear pre outs on the back of ur stereo. White & grey on fronts. And green & purple on rears. If ur adding sub(s) then u put that rca to ur sub output.
Red - ignition/acc 12 volts
Yellow - constant 12 volts
Black - ground
Blue- amp turn on
Orange - illumination
