deveny7
Junior Member
- Joined
- Jun 20, 2014
- Posts
- 22
- Reaction score
- 18
- Ram Year
- 2017 SRW
- Engine
- 6.7 Cummins
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
This is awesome! Best 30 seconds of my time so far1. Sit in truck and close all the doors: do NOT start truck.
2. Buckle seatbelt. Anyone in the passenger seat must also buckle their seatbelt (and leave it fastened).
3. Put truck in the RUN position: do NOT start truck. Turn keyfob to RUN or (keyless) do NOT press brake pedal; press start button twice.
4. Wait for seatbelt lamp to go out on DID or EVIC.
5. You now have 60 seconds to complete the next steps.
6. Within 10 seconds, unbuckle, then rebuckle, the seatbelt 3 times, ending with the seatbelt buckled. Watch the DID/EVIC and ensure the seatbelt lamp turns on/off each time you unbuckle/rebuckle the seatbelt.
7. Put the truck in the OFF position. Turn keyfob to OFF or (keyless) press the start button once. A single chime should sound indicating programming complete.
Notes:- The seatbelt chime will still sound 5 times when starting the truck. The seatbelt lamp will always be on. You will occasionally get messages saying seatbelt unbuckled on DID or EVIC