5100’s but want a little higher

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

louis

Junior Member
Joined
Dec 27, 2017
Posts
1
Reaction score
0
Location
Atlanta, GA
Ram Year
2006
Engine
5.7
B9B0D421-5E72-4647-8B6D-9E9267277FCB.jpeg I have 5100’s on my 06 ram but want to go a little higher on the front end... what should I do, any suggestions
 

Kody Matney

Junior Member
Joined
Jun 18, 2018
Posts
4
Reaction score
0
Location
Colstrip, Mt
Ram Year
2008
Engine
5.7
I'm in the same boat with my 08 with 5100. Not quite level. Debating putting my hell Bent 2" spacers on top of bilsteins
 

Jeffhs66

Junior Member
Joined
Jun 24, 2018
Posts
1
Reaction score
0
Location
Olympia wa
Ram Year
2006
Engine
5.7 Hemi
Can you do 5100's with spacers? I have 2.5 spacers but still want another 1" on my 0
 

Kody Matney

Junior Member
Joined
Jun 18, 2018
Posts
4
Reaction score
0
Location
Colstrip, Mt
Ram Year
2008
Engine
5.7
Tried today and too steep of an angle. Even at stock setting on bilsteins. Didn't work. I have the 2.5 hellbent spacers.
 
Top