Wheel spacers... aaaannnnnnd go!

DustanT · Sep 20, 2018

Ok thanks guys. I don't mind the stock 20" but with tires that are wider they will hit my UCA, tire is less than a finger width away from them now.

Mike.luciano · Sep 20, 2018

I just put 12 and a half wide tires on mine and you have to put a quarter inch spacer only on the front

DustanT said:
Ok thanks guys. I don't mind the stock 20" but with tires that are wider they will hit my UCA, tire is less than a finger width away from them now.

Sent from my SM-G892A using Tapatalk

DustanT · Sep 20, 2018

Mike.luciano said:
I just put 12 and a half wide tires on mine and you have to put a quarter inch spacer only on the front

Sent from my SM-G892A using Tapatalk

Oh I can't math then lol. you do 35's?

Mike.luciano · Sep 20, 2018

DustanT said:
Oh I can't math then lol. you do 35's?

Nope 33s. Was gonna do 35s but played it safe lol

Sent from my SM-G892A using Tapatalk

DustanT · Sep 20, 2018

You add longer studs? and what brand spacer?

Mike.luciano · Sep 20, 2018

DustanT said:
You add longer studs? and what brand spacer?

Not needed with 1/4"

Sent from my SM-G892A using Tapatalk

Gary2 · Sep 20, 2018

hub_rings.html. 10 mm over $200.00 spent . Don't need them after all , more bad advice. 35-12.50-20 BFG KO2s on 20x9 OE chrome clad

Mike.luciano · Sep 20, 2018

Turned out good.... but ordering 1.25" or 1.5" spacers lol

Sent from my SM-G892A using Tapatalk

DustanT · Sep 20, 2018

Mike.luciano said:
Turned out good.... but ordering 1.25" or 1.5" spacers lol

Sent from my SM-G892A using Tapatalk

1/4" spacer with 33/12.5? Been looking at those tires just haven't seen them on a truck yet. Looks great.

kdsooner · Sep 24, 2018

I went with Supreme Suspensions 1.5" off Amazon and love them. No issues after 5k miles. http://a.co/d/9Y007b0

Big Blue Hemi · Sep 24, 2018

Ok, I always have stuck with a wheel that is close to or the exact offset just because I am conservative and never gave different offsets much thought.
So does a lower number offset push the wheel out?
I know my rims are +19 stock so what does a zero offset do?
I'm actually looking to replace my rims now and the offset for the several rims I am looking at range from +12 to +20 but because of my mindset I am naturally leaning towards the +19 +20.

Ktulu990 · Sep 24, 2018

Love the look of these

Mike.luciano · Sep 24, 2018

2" supreme suspension spacers on the way lol

Sent from my SM-G892A using Tapatalk

DustanT · Sep 24, 2018

Big Blue Hemi said:
Ok, I always have stuck with a wheel that is close to or the exact offset just because I am conservative and never gave different offsets much thought.
So does a lower number offset push the wheel out?
I know my rims are +19 stock so what does a zero offset do?
I'm actually looking to replace my rims now and the offset for the several rims I am looking at range from +12 to +20 but because of my mindset I am naturally leaning towards the +19 +20.

0 offset would bring the wheel out about 3/4"

jagu366 · Sep 24, 2018

I've had mine for over 2 years. 2" hubcentric on factory wheels. No problems at all.

Big Blue Hemi · Sep 24, 2018

DustanT said:
0 offset would bring the wheel out about 3/4"

So less offset brings the wheel out. I have the factory flares so 0 offset might be a bit much for clearance with my 275-60 20's. Thanks

FXLRRAM · Sep 25, 2018

Mike.luciano said:
Turned out good.... but ordering 1.25" or 1.5" spacers lol

Sent from my SM-G892A using Tapatalk

So what is the total set up? Tire size and spacer? Did you level the truck?...
This looks PERFECT. Great job.
Thanks in advance for the info.

circuitguy · Sep 25, 2018

Don't trust them, will never use them. I have seen too many wheels fly off on the highway because of them. There is no substitute for going with the correct wheel offset.

circuitguy · Sep 25, 2018

Big Blue Hemi said:
So less offset brings the wheel out. I have the factory flares so 0 offset might be a bit much for clearance with my 275-60 20's. Thanks

Negative - offset puts the wheel out. Positive + offset brings the wheel in. Zero 0 offset would be dead center of the wheel.

Mike.luciano · Sep 25, 2018

FXLRRAM said:
So what is the total set up? Tire size and spacer? Did you level the truck?...
This looks PERFECT. Great job.
Thanks in advance for the info.

Yea truck has i believe a 3" leveling kit. It was leveled when i bought it. Jusy put the 33x12.50 tires on. Had lift spacer in the rear and removed that as soon as i put the new tires on, and my spacers just came today so ill have to find time to get them on and post an updated pic. And thanks yes its coming along rather nicely slowely but surely! Hopefully next year i can get it wraped

Sent from my SM-G892A using Tapatalk

Wheel spacers... aaaannnnnnd go!

Member

Member

Member

Member

Member

Member

Senior Member

Member

Member

Junior Member

Keep on keeping on

Member

Member

Member

Member

Keep on keeping on

Member

Senior Member

Senior Member

Member

Similar threads

Forum statistics

Share this page