Wheel Well Liners?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

DrTron

Senior Member
Joined
Jan 18, 2014
Posts
212
Reaction score
73
Location
Jackson MS
Ram Year
2022 PW
Engine
Hemi 6.4
Hi Everyone,

I was a bit surprised to see that my 2019 doesn't have liners in the wheel wells, neither front nor rear. I know that the rear liners were an option (which mine doesn't have), but it does look a bit silly without them (my 2010 had them front and rear) and it may offer better protection as well.

Mopar does not seem to offer them as aftermarket parts. Has anyone found ones that fit?

- Michael
 

chrisbh17

Senior Member
Joined
Oct 12, 2017
Posts
6,691
Reaction score
7,473
Ram Year
2017
Engine
Hemi 5.7
None in front seems wrong, I dont own a '19 but I also havent looked for wheel well liners in the front of the ones at the dealer because I just assumed there were there.

I do know the rears are optional, Im sure the sponsoring parts dealers on this site can get their hands on the part number, at least.
 

Accountant

Senior Member
Joined
Jun 13, 2018
Posts
481
Reaction score
409
Location
CA
Ram Year
2019
Engine
Laramie Hemi 5.7L
Front should have them. I would go back to the dealer. You should be able to buy the oem rear unless they are on backorder.


Sent from my iPhone using Tapatalk
 
OP
OP
D

DrTron

Senior Member
Joined
Jan 18, 2014
Posts
212
Reaction score
73
Location
Jackson MS
Ram Year
2022 PW
Engine
Hemi 6.4
I'll post a picture of the front when I get back to the truck. I mean, yes, the dome is protected, but they look a lot less complete than the ones on my 2010.

Oh, and the guy who designed the Mopar molded splash guards deserves a beating. They have an open pocket (just like a cup) directly behind the wheel. Great place to accumulate dirt in and nearly impossible to get that out again...
 

Accountant

Senior Member
Joined
Jun 13, 2018
Posts
481
Reaction score
409
Location
CA
Ram Year
2019
Engine
Laramie Hemi 5.7L
I'll post a picture of the front when I get back to the truck. I mean, yes, the dome is protected, but they look a lot less complete than the ones on my 2010.

Oh, and the guy who designed the Mopar molded splash guards deserves a beating. They have an open pocket (just like a cup) directly behind the wheel. Great place to accumulate dirt in and nearly impossible to get that out again...

Gotcha.

I hated the Mopar splash guards. Hated that cup and how it curves into the wheel well so larger tires will rub. Took mine off.


Sent from my iPhone using Tapatalk
 
OP
OP
D

DrTron

Senior Member
Joined
Jan 18, 2014
Posts
212
Reaction score
73
Location
Jackson MS
Ram Year
2022 PW
Engine
Hemi 6.4
I hated the Mopar splash guards. Hated that cup and how it curves into the wheel well so larger tires will rub. Took mine off.

Had them dealer installed as the ones on my old truck were really good. Well, the ones I have now do their job and don't look that bad either, but I can only shake my head at that cup design...
 
Top