Hoeoperator320
Junior Member
- Joined
- Sep 1, 2015
- Posts
- 8
- Reaction score
- 0
- Ram Year
- 2012
- Engine
- 5.7 hemi
Does anyone know what ball joint zone uses in their uca? I installed a pair on my truck today. All i can find is zone stating they're available at most auto part stores.
Also has anyone had issues with the ball joint castle nut torquing down completely past the cotter pin hole? I torqued it to 55ftlbs like the directions stated. It's the same on both sides. I was going to put the factory nyloc nut back on but it appears the threads are different. I put the cotter pin in so the castle nut can't come off but it can back off a little before it catches the pin. Everything else seems normal.
Also has anyone had issues with the ball joint castle nut torquing down completely past the cotter pin hole? I torqued it to 55ftlbs like the directions stated. It's the same on both sides. I was going to put the factory nyloc nut back on but it appears the threads are different. I put the cotter pin in so the castle nut can't come off but it can back off a little before it catches the pin. Everything else seems normal.