Bigguy2000
Junior Member
I haven't had much of a chance to research this, but does anybody manufacture aftermarket dashes? Not just the top, but the entire dash core. Would appreciate any guidance on this. I own a 1997 1500.
Dash (I know, I know.....garbage)
- Thread starter Bigguy2000
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Silver Goose
Senior Member
- Joined
- Aug 1, 2014
- Posts
- 186
- Reaction score
- 480
- Location
- Alma,Arkansas
- Ram Year
- 2018 2500 Larame Longhorn
- Engine
- Cummings 6.7 Diesel
Maybe your best bet would be a wrecking yard, find the best one you can, pull it yourself and save some money.
Larry
Larry
corneileous
Senior Member
- Joined
- Sep 6, 2016
- Posts
- 6,852
- Reaction score
- 3,918
- Location
- Podunkyville, OK
- Ram Year
- 2018 Ram 1500 Limited 4X4
- Engine
- Hemi 5.7
You need a whole, complete dash assembly? I would still check out LMC Truck for all that. They have the instrument bezel and the top cover which is the most likely part to transform into the consistency of peanut brittle.
http://www.lmctruck.com/icatalog/de/full.aspx?Page=37
Sent from my iPhone using Tapatalk Pro
http://www.lmctruck.com/icatalog/de/full.aspx?Page=37
Sent from my iPhone using Tapatalk Pro
Silver Goose
Senior Member
- Joined
- Aug 1, 2014
- Posts
- 186
- Reaction score
- 480
- Location
- Alma,Arkansas
- Ram Year
- 2018 2500 Larame Longhorn
- Engine
- Cummings 6.7 Diesel
Good idea on LMC, I had forgotten them it happens at my age.
Larry
Larry
corneileous
Senior Member
- Joined
- Sep 6, 2016
- Posts
- 6,852
- Reaction score
- 3,918
- Location
- Podunkyville, OK
- Ram Year
- 2018 Ram 1500 Limited 4X4
- Engine
- Hemi 5.7
LMC‘s a little on the expensive side but they seem to have good quality parts. I bought a new grille from them for the ole 08 Ram cuz the original was peeling and it seemed to have been of pretty good quality. It still looked just as good as the day I put it on there little over four years later when I sold it.
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
Shellkamp
Member
What's wrong with the dash core? You're probably not going to find one used in great shape.
I just installed the LMC dash cover and bezel and even with some parts of the plastic "skeleton" in the front cracked, I was able to epoxy it back together and the dash cover held everything in the proper place.
I have a '99 2500.
Sent from my Moto Z (2) using Tapatalk
I just installed the LMC dash cover and bezel and even with some parts of the plastic "skeleton" in the front cracked, I was able to epoxy it back together and the dash cover held everything in the proper place.
I have a '99 2500.
Sent from my Moto Z (2) using Tapatalk
