Black Headlights

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Status
Not open for further replies.

bryce88

Senior Member
Joined
Jun 20, 2018
Posts
330
Reaction score
326
Location
Utah
Ram Year
2015
Engine
5.7L Hemi
Thanks @jeffawats

@bryce88 - What Type of paint did you use and did you Oven first or Heat Gun?
I used regular black spray paint and I used the oven. I'm pretty sure I did 275 deg. for 7 min or something like that, but I had to put each one back in a couple times, so a total of about 3 times on the oven. I did use a heat gun for a couple areas but not very much. A nice big Flathead screwdriver was the best tool I found to dig the permaseal out. You kind of stick it in and twist to lift it out and gradually work your way around. And you'll want a pair of spreaders too. That helped quite a bit.
Here's the exact spray paint I used, and it worked great.
245197new.jpeg

Sent from my Pixel 2 XL using Tapatalk
 
Status
Not open for further replies.
Top