Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
H8/H9/H11 (M) to 9006 (F) adapter might be what you need. Your truck is originally a quad headlight truck correct?
To the best of my knowledge 9005 is standard for all 4th gen’s. Google your year make and model to verify, then that will be the ballast you need to order. That should plug and play from the harness to the housing.
Your aftermarket housing makes the conversion from 9005 to H1. That’s where you will have to figure out how to wire an H1 HID bulb to your housing were the conversion is made, and still maintain high beam capability. So, my original point being, making the connection from your harness to your housing with the correct ballast is priority number one. Once that’s resolved, you need to figure out how to wire the bulb.
Unfortunately marrying three aftermarket parts is not easy.
I understand what your getting at. But again it’s not valid. Because all I’m using from my headlight housings is just that. The housings along with a pigtail from the proj. Solenoid. All the wiring including the plug will be removed in replacement of the hid bulb, ballast and wiring.
So I need an adapter to go from a 9005 to an H1 low beam with a pigtail split for high beam.
Sent from my iPhone using Tapatalk
Haha fair enough my friend- I’ve sent an email out to a retailer here in Canada that sells all the adapters etc. Hopefully he can chime in.
When I ordered the hid kit I ordered an H1 kit. Because my new housings took an H1 bulb. Even if I ordered a 9005 hid kit. I would still need a 9005 to H1 adapter to my projector?
My head hurts. It sucks because I live in Canada so it takes like two weeks to get **** sent here.
Sent from my iPhone using Tapatalk
I didn't take any before pics with my quads...I would be i terested in beam pattern pics against a flat wall and perhaps impressions of brightness compared to stock quads if you could pretty please.
I have been seriously considering finding some lights like this as I drive 80 miles of country winding roads, no streetlights, lots of deer, wet/icy often.
Sent from my SM-G892A using Tapatalk
I didn't take any before pics with my quads...
Sent from my Pixel 2 XL using Tapatalk
All you need to do is splice the 2 prong wires that go into the headlights into the original low beams that come from the factory harness. Basically your sending the power signal to the ballast. I have a couple of builds with pictures. Let me know if u want a link.
Sent from my Pixel using Tapatalk
https://r.tapatalk.com/shareLink?ur...share_tid=128787&share_fid=17770&share_type=tSure man that would be great. I ordered a set of splitters that I posted above. I think that should do what I want but would like to see your build.
Sent from my iPhone using Tapatalk