tomorrow is the day!

limechallenger · Feb 5, 2019

I've got a 2014 Ram regular cab sport 4x4 ,tomorrow I'm finally doing a level and 35's , been wanting to do this for the last two years! Hope it goes well! I'm going with Rancho Quick Lifts in front and Rancho 9000 series in the back. My stock measurement show a 2 1/2 inch rake, so when the Rancho's settle at 2 inches ,I should be left with just a little rake. I'm good with that over stock!

ram1500rsm · Feb 5, 2019

Good luck, are you doing the install yourself ? crazy how much rake we have from the factory

mboymopar · Feb 5, 2019

Sounds great looking forward to the picks.

limechallenger · Feb 6, 2019

ram1500rsm said:
Good luck, are you doing the install yourself ? crazy how much rake we have from the factory

No I'm having it installed, that way if anything rubs I can take it back to the Rancho dealership!

Hot94Z28 · Feb 7, 2019

I would like to see pics too, I have been debating on these or the 5100’s. I loved my Rancho shocks on my Jeep, I had 5100’s and was not happy with them. But I did run 5100’s on my 03 Silverado and they were fine.

Sent from my iPhone using Tapatalk

limechallenger · Feb 7, 2019

Here it is 2014 Ram Regular cab 4x4 ,

Rancho Quick lifts on the front, Rancho 9000 series on the back, Nitto Ridge Grapplers 35x12.5x20 on stock aluminum sport wheels. no rubbing what so ever! I 've got 1/4" to 3/8" clearance between tires and UCA.

JB1 · Feb 7, 2019

looks great I'm glad they didn't rub

Hot94Z28 · Feb 9, 2019

limechallenger said:
Here it is 2014 Ram Regular cab 4x4 ,View attachment 154666 Rancho Quick lifts on the front, Rancho 9000 series on the back, Nitto Ridge Grapplers 35x12.5x20 on stock aluminum sport wheels. no rubbing what so ever! I 've got 1/4" to 3/8" clearance between tires and UCA.

You running wheel spacers?

Sent from my iPhone using Tapatalk

gofishn · Feb 9, 2019

That is a very sharp truck.

MidwestExpress · Feb 9, 2019

Looks awesome, congrats! I'm a big RC fan, trapped in a CC truck for family needs.

limechallenger · Feb 9, 2019

Hot94Z28 said:
You running wheel spacers?

Sent from my iPhone using Tapatalk

Nope ,no wheel spacers!

Hot94Z28 · Feb 9, 2019

limechallenger said:
Nope ,no wheel spacers!

How do you like the ride? I had 5100’s on my old 03 Chevy and liked them, but I put them on my 2013 Wrangler and did not like them at all. I switched out to Rancho 9000’s and loved them.

Sent from my iPhone using Tapatalk

limechallenger · Feb 9, 2019

So far the ride is great! They are set at stock , I may drop it down a notch or two just to soften it up a little. I'm gonna let it settle first, then decide. I was not real happy with stock , but we will see! I would highly recommend the Ridge Grapplers , they are extremely QUIET!

Tracy in IL · Feb 11, 2019

so no actual lift on the rear (stock height)? did you change gears or a program change for tranny/speedo?

Hot94Z28 · Feb 11, 2019

I, myself is curious on what you guys are using to adjust the speedo.

Sent from my iPhone using Tapatalk

cyclepuck · Feb 11, 2019

Hot94Z28 said:
I, myself is curious on what you guys are using to adjust the speedo.

Sent from my iPhone using Tapatalk

I used the rough country calibrator. Easy to use and kind of inexpensive.

limechallenger · Feb 11, 2019

Tracy in IL said:
so no actual lift on the rear (stock height)? did you change gears or a program change for tranny/speedo?

Just ordered a Hypertech Speedometer/ odometer tuner today, I will post results after I get it loaded!

limechallenger · Feb 11, 2019

Tracy in IL said:
so no actual lift on the rear (stock height)? did you change gears or a program change for tranny/speedo?

stayed stock height, but with the 9000 series shocks you can adjust the ride quality(soft to firm) ordered Hypertech tuner for speedo/ odometer today

Dinky · Feb 12, 2019

Use AlfaOBD $50 for the program and bluetooth obd scan tool. You can change tire size there and everything else while your at it. Just search the forum for AlfaOBD

limechallenger · Feb 23, 2019

limechallenger said:
Just ordered a Hypertech Speedometer/ odometer tuner today, I will post results after I get it loaded!

Well actully I ended up with the Superchips Flash/cal, it worked great and can be upgraded to the Flashpaq tuner at a later date!

tomorrow is the day!

Senior Member

Senior Member

MOPAR

Senior Member

Junior Member

Senior Member

Senior Member

Junior Member

Senior Member

Senior Member

Senior Member

Junior Member

Senior Member

Senior Member

Junior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Forum statistics

Share this page