Turn signal help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Doughbelly

Junior Member
Joined
Feb 1, 2019
Posts
4
Reaction score
0
Location
Bristol vs
Ram Year
1988
Engine
318
I picked up a 1988 w100 the other day and have been having trouble the passenger side front turn signal it dosent blink when i turn the right turn signal the tail light gets brighter but dosent blink the indicator on the dash dosent light up ether but the drivers side works fine any help would be appreciated i need to get this working so i can pass va inspection i already put a new bulb in
 

JohnnyMac

There are no stupid questions, just stupid people.
Military
Joined
Mar 31, 2018
Posts
2,558
Reaction score
2,921
Location
SouthWest Washington
Ram Year
2018 1500 Laramie
Engine
3.0 EcoBurner
Check all your bulbs. If one is corroded it could short something out.
 

reek

Senior Member
Joined
Nov 23, 2014
Posts
1,592
Reaction score
733
Location
Sacramento
Ram Year
2015 RAM 2500 CC 4x4, 72 D100, 73 D100, 01 RAM 2500 field truck
Engine
6.4 Hemi
try your hazard button. that way you can determine if it's the wiring/bulbs vs the turn signal cam. If the hazard button works but the turn signal doesn't you know it's the signal cam. If it also doesn't work, then start tracking the bulbs and/or connections. that'll atleast get you started.
 
OP
OP
D

Doughbelly

Junior Member
Joined
Feb 1, 2019
Posts
4
Reaction score
0
Location
Bristol vs
Ram Year
1988
Engine
318
All signals work with hazzards on except the on thats out on the front
 

reek

Senior Member
Joined
Nov 23, 2014
Posts
1,592
Reaction score
733
Location
Sacramento
Ram Year
2015 RAM 2500 CC 4x4, 72 D100, 73 D100, 01 RAM 2500 field truck
Engine
6.4 Hemi
so most likely a connection issue to the bulb rather than a central/switch issue. unfortunately, that leaves you with tracing the line back from the bulb/bulb connector.

down side is, the wire can pretty be traced all the way back into the steering column. Hopefully it's in the bulb connector or the steering harness connector.

the one thing I don't know is if the flasher relay has a side specific connection or not and if the hazard flash / relay connects into it. hopefully someone else can chime in on that one.

good luck.
 

crazzywolfie

Senior Member
Joined
Apr 6, 2013
Posts
16,431
Reaction score
3,192
Location
under the truck
Ram Year
81 93
Engine
5.2
have you checked the grounds? the dash indicators get power from the front turn signals so if something up front is not working they won't work or if you got a dead marker light they will stay lit up the entire time you got the lights on.
 
OP
OP
D

Doughbelly

Junior Member
Joined
Feb 1, 2019
Posts
4
Reaction score
0
Location
Bristol vs
Ram Year
1988
Engine
318
Turn signal switch is bad but. Now there's another problem my truck dosent have a tilt wheel but the only switches I can find are for tilt wheels and they won't fit in my column this is what I need any one know a part number or any thing20190214_181418.jpg
 

jakefrancis127

Junior Member
Joined
Jan 28, 2019
Posts
15
Reaction score
1
Location
Texas
Ram Year
1986
Engine
360
page 75 lmc dodge ram catalouge lists the cam for a '88 w/o tilt
 
Top