AlfaOBD

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

gapi

Senior Member
Joined
Feb 1, 2019
Posts
105
Reaction score
41
Location
Georgia
Ram Year
2013
Engine
HEMI 5.7
Thanks guys. I experimented on a 2013 Charger R/T Plus that also had mirrors upgraded to memory and drivers side auto dimming. They came off of a 2013 Charger SRT. Dual plugs with several wires in the white plugs.

We got the auto-dimming drivers side working and the fogs to not drop out on high beam. But no memory or tilt in reverse. No option to choose tilt in reverse.

We also noted there were no CMS listings. I guess it may be a year model availability thing, or is there another list for them?
 

WilliamS

Senior Member
Joined
May 3, 2016
Posts
2,638
Reaction score
1,191
Location
Tampa FL
Ram Year
2014
Engine
Hemi 5.7
In doors section
Drivers side mirror memory (Yes)
Passenger side mirror memory (Yes)
Tilt in reverse in the custset menu.
(CSM) (Yes)
One thing to note is the (Tilt In Reverse) function will not work unless you have memory mirrors. You need to have more than 4 wires in the white mirror plug.

Sent from my SM-G960U using Tapatalk

I havent pulled the mirror off yet, but I have folding, turn signal, heated, auto dimming. Id have a hard time believing they left the memory part out. I think a few guys said it was related to having memory seat door module?
 

chrisbh17

Senior Member
Joined
Oct 12, 2017
Posts
6,691
Reaction score
7,473
Ram Year
2017
Engine
Hemi 5.7
I havent pulled the mirror off yet, but I have folding, turn signal, heated, auto dimming. Id have a hard time believing they left the memory part out. I think a few guys said it was related to having memory seat door module?
I have all of that without memory. They really are two different mirrors just with and without memory.

Most memory mirrors will have the chrome cap on the outside. I think there was a fairly rare configuration with memory but without the chrome, but I can't remember if that's true or not.

Sent from my Nexus 6P using Tapatalk
 
OP
OP
Ghost_RAM

Ghost_RAM

Senior Member
Joined
Jan 10, 2018
Posts
1,367
Reaction score
1,088
Location
VA
Ram Year
2016
Engine
Hemi 5.7
3. Activated DRLs (via LED turn signals.

However, even though the DLRs are working, I don't see the option to turn them "off and on" in the 8.4" settings screen. I made changes as described in post 150. Do I have to wait a few ignition cycles for it to appear. Or do I have to reset the radio to factory settings? I did turn on and off the truck about 8 times in a period of 20 minutes or so. Confused...
As said before some settings take longer for whatever reason on different year models. If you have set the CSM at the bottom of the list in car configuration change then the setting should appear in your radio under settings/lights/daytime running lamps.

You can try a radio reset with holding the volume button and channel select button for a few seconds until the unit goes shuts down. Remember the DRLs also will not activate while in park or with the e-brake on.
 

Ricks Ram

Senior Member
Joined
May 1, 2015
Posts
4,411
Reaction score
3,386
Ram Year
2014
Engine
Hemi 5.7
I havent pulled the mirror off yet, but I have folding, turn signal, heated, auto dimming. Id have a hard time believing they left the memory part out. I think a few guys said it was related to having memory seat door module?
All the door modules are memory capable. The only difference is power fold or non power fold. As stated the mirror options you have are common without memory. Almost all the memory style mirrors are going to be the chrome capped mirrors. Even though the Sports themselves never came with memory there are also a few painted versions that came on the Laramie trucks with the Sport appearance package.

Sent from my SM-G960U using Tapatalk
 
Last edited:

Gibbs

Senior Member
Joined
Dec 22, 2017
Posts
241
Reaction score
131
Location
GA
Ram Year
2018
Engine
6.7L Cummins
Is there a CSM for auto dim rearview mirror (EC Mirror) under car configuration change?

I couldn't find one
 

Ricks Ram

Senior Member
Joined
May 1, 2015
Posts
4,411
Reaction score
3,386
Ram Year
2014
Engine
Hemi 5.7
Is there a CSM for auto dim rearview mirror (EC Mirror) under car configuration change?

I couldn't find one
No it's Vehicle config#3. If you have the 8.4 radio and you enable it the soft key should show up on your apps screen. Sometimes it takes several ignition cycles for it to show up. 4bf1a1d1b55af80370aa854bb34e8051.jpg

Sent from my SM-G960U using Tapatalk
 

Gibbs

Senior Member
Joined
Dec 22, 2017
Posts
241
Reaction score
131
Location
GA
Ram Year
2018
Engine
6.7L Cummins
No it's Vehicle config#3. If you have the 8.4 radio and you enable it the soft key should show up on your apps screen. Sometimes it takes several ignition cycles for it to show up. 4bf1a1d1b55af80370aa854bb34e8051.jpg

Sent from my SM-G960U using Tapatalk


I did enable that setting last night but haven't had a chance to check it today. I just wanted to make sure, since there's usually a CSM to get soft keys to show up. Thank you for the confirmation.
 
Last edited:

719c6

Member
Joined
Feb 12, 2015
Posts
32
Reaction score
13
Ram Year
2011
Engine
5.7
You would select radio frequency hub for select function, then select wireless control module my2011-12 non PowerNet for control unit. Then select program ignition keys or key fobs and follow the instructions. Don’t worry about running “ELV/ESCL replaced” or “PEM replaced” as you don’t have an electronic steering column lock or a passive entry module.

Got home and programmed an additional key/fob. Thanks for all the help.
 

mxrider309

Junior Member
Joined
Feb 18, 2019
Posts
13
Reaction score
2
Location
memphis
Ram Year
2018
Engine
6.4
can I use this OBDLink MX+ with alfaobd software? instead OBDLink MX verison only?
I like this option of being able to use it with my iphone for different apps.
thanks for input
 

1500ram12

Senior Member
Joined
Jan 23, 2012
Posts
5,487
Reaction score
2,427
Ram Year
2005
Engine
5.9L Cummins
can I use this OBDLink MX+ with alfaobd software? instead OBDLink MX verison only?
I like this option of being able to use it with my iphone for different apps.
thanks for input

Yes you can.


Sent from my iPhone using Tapatalk Pro
 

mdifilippo

Senior Member
Joined
Mar 12, 2017
Posts
571
Reaction score
348
Location
NJ
Ram Year
2017
Engine
5.7 hemi
Just setup my DRLs finally, have them set to the low beam for now but may change em over. **Thanks 1500ram12 for the answer below to this** Wish there was a way to disable them turning off when you turn on the blinker but i realize that may be a safety thing so that the blinker is more noticeable.

Now to figure out what other changes to make to the truck with this haha.
 
Last edited:

1500ram12

Senior Member
Joined
Jan 23, 2012
Posts
5,487
Reaction score
2,427
Ram Year
2005
Engine
5.9L Cummins
Just setup my DRLs finally, have them set to the low beam for now but may change em over. Wish there was a way to disable them turning off when you turn on the blinker but i realize that may be a safety thing so that the blinker is more noticeable.

Now to figure out what other changes to make to the truck with this haha.

You would set drl drop out to no


Sent from my iPhone using Tapatalk Pro
 

Gibbs

Senior Member
Joined
Dec 22, 2017
Posts
241
Reaction score
131
Location
GA
Ram Year
2018
Engine
6.7L Cummins
@Ricks Ram, I checked the radio (UAS) at lunchtime and the soft key was there for auto-dimming mirror, so I should be good to go. I haven't driven it at night to confirm operation, but have no reason to think it won't work.
 

Ricks Ram

Senior Member
Joined
May 1, 2015
Posts
4,411
Reaction score
3,386
Ram Year
2014
Engine
Hemi 5.7
@Ricks Ram, I checked the radio (UAS) at lunchtime and the soft key was there for auto-dimming mirror, so I should be good to go. I haven't driven it at night to confirm operation, but have no reason to think it won't work.
Yip you should be fine as long as you have an auto dim mirror.

Sent from my SM-G960U using Tapatalk
 

Gibbs

Senior Member
Joined
Dec 22, 2017
Posts
241
Reaction score
131
Location
GA
Ram Year
2018
Engine
6.7L Cummins
Yes sir, I installed one last night that I bought from a member on here.
 

719c6

Member
Joined
Feb 12, 2015
Posts
32
Reaction score
13
Ram Year
2011
Engine
5.7
Where do ya adjust the TPMS threshold for a 2011?
 

Staff online

Members online

Forum statistics

Threads
194,902
Posts
2,863,860
Members
155,252
Latest member
radikio
Top