muzupan
Senior Member
- Joined
- Nov 23, 2015
- Posts
- 234
- Reaction score
- 105
- Location
- Rocky Mount NC
- Ram Year
- 2019 Ram1500 Crew Cab
- Engine
- Hemi 5.7
Here is what mine looks like.
Edge Pulsar owners fuel mileage increase report
- Thread starter muzupan
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
pwjouster
Senior Member
- Joined
- Jan 22, 2018
- Posts
- 337
- Reaction score
- 251
- Location
- South Florida
- Ram Year
- 2018
- Engine
- 6.4 Hemi
its very simple.
once installed, looking at the pcm from the front of the truck.
the left side top bolt is suspended in the air and is nut and bolted to the Pulsar.
the bottom left bolt on the PCM will bolt into the top bolts factory original truck side location.
top left of pulsar is angled up, rotating on the axis of the single bolt side.........
remove all three bolts.
-insert the first bolt into the bolt hole on the side with only 1 hole.
-Pivot the unit on the bolts axis, upwards, until the bottom Pulsar/PCM bolt hole lines up with the top Truck-side screwhole
once installed, looking at the pcm from the front of the truck.
the left side top bolt is suspended in the air and is nut and bolted to the Pulsar.
the bottom left bolt on the PCM will bolt into the top bolts factory original truck side location.
top left of pulsar is angled up, rotating on the axis of the single bolt side.........
remove all three bolts.
-insert the first bolt into the bolt hole on the side with only 1 hole.
-Pivot the unit on the bolts axis, upwards, until the bottom Pulsar/PCM bolt hole lines up with the top Truck-side screwhole
muzupan
Senior Member
- Joined
- Nov 23, 2015
- Posts
- 234
- Reaction score
- 105
- Location
- Rocky Mount NC
- Ram Year
- 2019 Ram1500 Crew Cab
- Engine
- Hemi 5.7
I understand what you’re saying about bolting it in but my concern is does your truck have the small metal tube that is shown in my picture underneath the plug? If it does, are the plugs sitting on the tube or are they off of the tube? Thank you .
pwjouster
Senior Member
- Joined
- Jan 22, 2018
- Posts
- 337
- Reaction score
- 251
- Location
- South Florida
- Ram Year
- 2018
- Engine
- 6.4 Hemi
my truck had the same lines running in that area.
the right harness latch will be in close quarters but i dont recall any contact.
the right harness latch will be in close quarters but i dont recall any contact.
muzupan
Senior Member
- Joined
- Nov 23, 2015
- Posts
- 234
- Reaction score
- 105
- Location
- Rocky Mount NC
- Ram Year
- 2019 Ram1500 Crew Cab
- Engine
- Hemi 5.7
Ok great thanks, I will reorder the edge pulsar
muzupan
Senior Member
- Joined
- Nov 23, 2015
- Posts
- 234
- Reaction score
- 105
- Location
- Rocky Mount NC
- Ram Year
- 2019 Ram1500 Crew Cab
- Engine
- Hemi 5.7
I re-ordered my edge pulsar for my 2018 ram 2500 and I have it installed and I will give back my report and feedback on it in a couple of days
Similar threads
Staff online
-
GriffinSenior Member
Members online
- turkeybird56
- M4jk1
- CanuckRam1313
- Ol3Toes
- MMME
- 10000 Lakes
- Back in Black
- 62Blazer
- Art_in_CO
- Bfrawls82
- AlexC2350
- Lil' Rob
- CRS1968
- StateOfMind
- Old Fart
- duckman631
- Sweeper6
- TRK_GANG74
- Black1500Ram
- Deercamp
- lkmiller
- haleme
- Wheels46
- dieseldave
- rzr6-4
- RodeoRam
- Snyd
- Stefan N
- dsherman26
- RedRam1500JP
- biodiesel
- RamDiver
- Daw14
- Dean2
- Motoman501
- Lsujker
- JoshsRam
- DickLowman
- Griffin
- jagu366
- Jeepwalker
- Warlock2024
- peterz56
- Brandon-w
- alex6666
- Joshua Collins
- Nephilim70
- Audiowriter
- maxx442
- azcoyote