What did you do with your 4th Gen this week?

JoshR104 · Mar 15, 2019

Decided it was a nice warm day out to debage it and try out the 3m eraser wheel much easier to remove all that glue for sure. Not sure if I want to get rid of the 4x4 logos on the back yet or not...

mboymopar · Mar 15, 2019

JoshR104 said:
Decided it was a nice warm day out to debage it and try out the 3m eraser wheel much easier to remove all that glue for sure. Not sure if I want to get rid of the 4x4 logos on the back yet or not...

View attachment 158957

Looks great without the badges

revitupmoto33 · Mar 15, 2019

Put the freshly painted sliders back on

revitupmoto33 · Mar 15, 2019

Also in the process of re-valving the icon rear shocks. Been wanting some more compression and rebound resistance to account for the different coil springs and added weight, and I like to go faster in the desert than I should. One call to Icon Vehicle Dynamics and they spec’d out a new shim stack for me, really helpful guys over there. One shock down and one to go.

hodge-xj · Mar 15, 2019

revitupmoto33 said:
Put the freshly painted sliders back on

View attachment 158961

View attachment 158962

Man those things came out slick. Pat yourself on the back for all that frustration, I know those bends aren't fun

Sent from my SM-N920V using Tapatalk

revitupmoto33 · Mar 15, 2019

hodge-xj said:
Man those things came out slick. Pat yourself on the back for all that frustration, I know those bends aren't fun

Sent from my SM-N920V using Tapatalk

Thanks buddy. With every project I seem to get a little better using it, and double/triple checking measurements before putting it in the bender is a must

revitupmoto33 · Mar 15, 2019

hodge-xj said:
Man those things came out slick. Pat yourself on the back for all that frustration, I know those bends aren't fun

Sent from my SM-N920V using Tapatalk

Thanks buddy. With every project I seem to get a little better using it, and double/triple checking measurements before putting it in the bender is a must

hodge-xj · Mar 15, 2019

revitupmoto33 said:
Thanks buddy. With every project I seem to get a little better using it, and double/triple checking measurements before putting it in the bender is a must

Yea, I'd not want to waste at the premium steel is going for now a days. That being said what's next on the list????

Sent from my SM-N920V using Tapatalk

TXCOMT · Mar 15, 2019

Also got my UOA from Blackstone...I'll post it over in the Synthetic Oil thread but let's just say my 30-weight QSUD is doing superbly! The lab rats say to go for a 11.5K-mile OIC next time...wow!

TXCOMT

revitupmoto33 · Mar 15, 2019

hodge-xj said:
Yea, I'd not want to waste at the premium steel is going for now a days. That being said what's next on the list????

Need to figure out something for my spare tire, was going to go pick up a used tire the same size the see about building a swing out rack. Already ordered some delrin bushings just waiting on delivery. But at the same time would like to sell the current camper and build a new one similar to those Alu-Cab ones with full rear doors and ditch the tailgate.

hodge-xj · Mar 15, 2019

revitupmoto33 said:
Need to figure out something for my spare tire, was going to go pick up a used tire the same size the see about building a swing out rack. Already ordered some delrin bushings just waiting on delivery. But at the same time would like to sell the current camper and build a new one similar to those Alu-Cab ones with full rear doors and ditch the tailgate.

Now you're speaking my language!! My local offroad shop is an alucab distributor. I drool over those things. Would you do a swing out gate or s bumper mounted?

Sent from my SM-N920V using Tapatalk

RAM DRVR · Mar 15, 2019

corneileous said:
I don’t know how true it is but the guy that sold me my bulbs said that HID’s were better for the projectors.

Sent from my iPhone using Tapatalk Pro

That what I have been reading...…...

revitupmoto33 · Mar 15, 2019

hodge-xj said:
Now you're speaking my language!! My local offroad shop is an alucab distributor. I drool over those things. Would you do a swing out gate or s bumper mounted?

Sent from my SM-N920V using Tapatalk

They are so rad, but for starting at 10k!! That’s insane. I 100% dig those ones along with the Habitat, Vagabond and GoFast Campers. My buddy wants to build one similar to the gofast but I’m leaning more toward the Vagabond style. Ideally a Swing out off the camper itself or mount to the rear lift hatch with some heavy duty gas struts.

tmh3655 · Mar 15, 2019

This week I finally got my AlfaOBD app and MX dongle up and running and put in all LED exterior lighting including headlights without having to use any resistors, special canbus bulbs, or special harnesses, and best of all no error codes and/or dash warning messages on my 2017 Laramie. What a great app, although potentially very dangerous if you don't keep very close track of what you change. Lots of great posts on this forum to avoid major pitfalls. Previously I had been using load resistors all over the place to accomplish the same thing. AlfaOBD is so much simpler and I would think much more reliable.

JB1 · Mar 15, 2019

tmh3655 said:
This week I finally got my AlfaOBD app and MX dongle up and running and put in all LED exterior lighting including headlights without having to use any resistors, special canbus bulbs, or special harnesses, and best of all no error codes and/or dash warning messages on my 2017 Laramie. What a great app, although potentially very dangerous if you don't keep very close track of what you change. Lots of great posts on this forum to avoid major pitfalls. Previously I had been using load resistors all over the place to accomplish the same thing. AlfaOBD is so much simpler and I would think much more reliable.

Alfaobd is a game changer

electricyeti · Mar 15, 2019

Do the changes stay when you unhook it?

Sent from my Pixel 2 XL using Tapatalk

Jstmahoney · Mar 15, 2019

Washed my truck after months of winter storms. It was so dirty!
Tried out the chemical guys set. Wasn’t that impressed honestly...I may return it.

Sent from my iPhone using Tapatalk

fire101fighter · Mar 15, 2019

Jstmahoney said:
Washed my truck after months of winter storms. It was so dirty!
Tried out the chemical guys set. Wasn’t that impressed honestly...I may return it.

Same here. They seemed great at first and now that they are in Walmart and AutoZone and other places their quality definitely lacks.

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

kad · Mar 15, 2019

electricyeti said:
Do the changes stay when you unhook it?

Sent from my Pixel 2 XL using Tapatalk

Assuming you're referring to AlphaOBD, yup, they do. The only thing that will revert them (other than you doing it deliberately) is if the dealer flashes the BCM on the truck back to stock.

-K

electricyeti · Mar 15, 2019

kad said:
Assuming you're referring to AlphaOBD, yup, they do. The only thing that will revert them (other than you doing it deliberately) is if the dealer flashes the BCM on the truck back to stock.

-K

Nice. I may need one. To go with all the other gadgets I have. Tuner and burnbox . Zzz

Sent from my Pixel 2 XL using Tapatalk

What did you do with your 4th Gen this week?

Senior Member

MOPAR

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Junior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Forum statistics

Share this page