Hipps2000
Senior Member
- Joined
- Jan 15, 2014
- Posts
- 897
- Reaction score
- 406
- Ram Year
- 2013 Ram 1500 Bighorn
- Engine
- Hemi 5.7l
Core 4x4 also makes rear end links too!
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Looks great!
Thank you sir!
Any of these items are available through [email protected]
I will continue to do business with them because they have delivered on every reasonable request I've made!
Rear bars installed. Need better picsView attachment 159205View attachment 159206
I just noticed.....your rear shocks are mounted upside down, the boot should be at the bottom since your shock label is upside down.
https://www.truckspring.com/blog/post/2014/05/28/can-i-mount-bilstein-shocks-upside-down
SOB... this is what happens when I don't inspect a shop's install. At the time when I got it lifted I was in the process of moving. I didn't have the tools or space to install the kit myself.
I have a set of brand new in the box shocks, if I go by the labels on the shock as per above article, my boots will be on the top.
It can get confusing
always look at the Bilstein logo. If it is upside down, so are your shocks
So how do these differ from Dirt King extended arms or Gor extended arms. These are considerable cheaper and if I can get the same results with these plus a lifetime warranty I would go this route in a heart beat. Can some one help me figure this out?
I prefer the Johnny Joint on the core4x4 parts
over a heim joint?
hell yes
My arms use sealed johhny joints. Cores johhny joints are not sealed, and if you drive in snow with salt, the non sealed johhny joints will corrode and lock up.
View attachment 162821