Vicman
Senior Member
- Joined
- May 23, 2016
- Posts
- 105
- Reaction score
- 126
- Location
- Valdese, NC
- Ram Year
- 2016 Power Wagon
- Engine
- 6.4 Hemi
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Quick question, isn’t the vertical “powerwagon” sign on the sides of the bed a one piece decal which includes the horizontal black strip between the wheel opening and the front of bed? Or can you take the logo off without disturbing the black bottom. I thought it was one piece but I hope I’m wrong
Leave the truck in the Sun to heat up the adhesive. Use fishing line to slice through the adhesive. Don't scuff the paint with it. Back in the garage to cool off, Then your choice of adhesive remover. I used plain rubbing alcohol. Drench a rag and start rubbing. The adhesive will clog the rag quickly so have a few available to swap out. A good coat of wax and you'll never know they were there.Anyone have a good way to get the badges off I would like them gone as well as the tail gate RAM sign
Leave the truck in the Sun to heat up the adhesive. Use fishing line to slice through the adhesive. Don't scuff the paint with it. Back in the garage to cool off, Then your choice of adhesive remover. I used plain rubbing alcohol. Drench a rag and start rubbing. The adhesive will clog the rag quickly so have a few available to swap out. A good coat of wax and you'll never know they were there.
A used toothbrush will take that wax residue off. It should be soft enough to leave no marks. I keep a bag of them in with my cleaning supplies.All the trucks look great without emblems the worst thing about the pw emblem is that wax builds up along the edges and looks like crap, I may be taking mine off as well